how to remove push mower blade

How to Remove Push Mower Blade

By Sarah Hernandez
AD

Ever found yourself frustrated with dull blades on your push mower? struggles to cut grass properly? It might be time to remove and sharpen those blades, or replace them altogether. Here's a step-by-step guide on how to remove your push mower blade safely and efficiently.

Before we dive in, a word of caution: Always disconnect your mower from the power source before beginning any maintenance tasks. For gas-powered mowers, allow the engine to cool down and ensure there's no fuel in the carburetor. For electric mowers, remove the spark plug to prevent any accidental starts.

Preparation: Safety First

Ensuring your safety is paramount when dealing with mower blades. Apart from disconnecting the power source, you'll need to stabilise your mower by placing it on blocks or wooden planks to prevent it from tipping over.

AD
How to safely remove your mower blade
How to safely remove your mower blade
How To Remove And Sharpen A Lawn Mower Blade - Safely And Easily
How To Remove And Sharpen A Lawn Mower Blade - Safely And Easily
Refresh Your Mower Blades In-Place for a Precision Cut
Refresh Your Mower Blades In-Place for a Precision Cut

Next, wear heavy-duty work gloves to protect your hands from sharp edges. It's also advisable to wear safety glasses to shield your eyes from debris and dust.

Locating the Blades

Push mowers generally have two types of blade designs: flat or cylindrical. The majority of mowers use a flat blade, which is simpler to remove. To access the blade, you'll need to locate the mower deck. This is typically found beneath the mower, often covered by a welded metal plate.

HOW TO SHARPEN A PUSH MOWER (OR A REEL MOWER.)
HOW TO SHARPEN A PUSH MOWER (OR A REEL MOWER.)

If your mower doesn't have a deck, you might need to remove the bottom cover or housing to access the blade. Use a wrench to loosen and remove the bolts or screws. Be cautious not to lose any of these small parts as they're crucial for reassembly.

supporting the Blade

Once you've located the blade, you'll need to support it to prevent it from moving while you're trying to remove it. Many mowers come with built-in ports on the mower deck or blade cover to insert a bolt or support rod to keep the blade stationary.

AD

If your mower doesn't have these ports, you can improvise by using a strong piece of wood or metal that you can insert between the blade and the mower deck to act as a support. Be sure to position it safely, ensuring it doesn't interfere with your workspace.

Removing the Blade

Now that your blade is properly supported, you can start the removal process. On many mowers, you'll find a large nut orbolt connecting the blade to the spindle, which is the shaft that rotates the blade.

Use a wrench to loosen and remove this nut or bolt. Keep in mind that it might be quite tight, so you may need to apply some force. Be patient and turn it slowly to prevent any accidents. Once the nut or bolt is entirely removed, the blade should separate from the spindle.

AD

Removing the Washer

After removing the blade, you might see a washer under the blade. This washer is usually flat and can be easily overlooked. Make sure to remove it as well, as it's an integral part of the blade assembly. Without this washer, your blade may not function correctly once you reinstall it.

Carefully pren the washer off using your fingers or a flathead screwdriver if necessary. Ensure you're disposing of it correctly, as it may still be sharp on the edges due to the friction with the blade.

Cleaning and Inspection

With the blade removed, you now have a perfect opportunity to clean and inspect it. Use a wire brush or a scraper to remove any grass, dirt, or debris that has accumulated on the blade. This will not only prolong the blade's life but also make it safer to handle.

AD

Inspect the blade for any signs of damage, such as cracked edges, warping, or excessive wear. If the blade is beyond repair, you may need to consider replacing it. Otherwise, you can proceed to sharpening it for better cutting efficiency.

Reassembly and Maintenance

Once you've cleaned and inspected your blade, it's time to reinstall it, or if you've replaced it, to attach the new one. Begin by positioning the washer back onto the spindle, ensuring it's properly aligned.

Next, place the blade on top of the washer, securing it against the spindle. Reattach the nut or bolt and use a wrench to tighten it. Be careful not to overtighten, as this could strip the threads or warp the blade.

Sharpening the Blade

If you've decided to reuse your blade, you'll need to sharpen it for optimal performance. You can use a bench grinder or an angle grinder with a grinding wheel to achieve this. Ensure you're wearing the appropriate safety gear, including safety glasses and gloves.

Hold the blade at a slight angle against the grinding wheel, moving it in a smooth motion. Work on both sides of the blade evenly to maintain its balance. Be cautious to avoid overheating the blade, as this can cause warping.

Reassembling the Mower

With the blade secured and sharpened, or a new one attached, you can now reassemble your mower. Reattach the mower deck or bottom cover, making sure to replace all the bolts or screws securely.

Before starting your mower, ensure there are no loose parts or tools near the blades to prevent accidental contact. For gas-powered mowers, prime the engine and let it start. Electric mowers should be ready to go once you've reconnected the power source.

Regularly inspecting and maintaining your push mower blade is essential for optimal performance and longevity. By following these steps, you can extend the life of your blade, improve your mower's efficiency, and ensure a clean, well-groomed lawn. Happy mowing!

AD