DIY Pool Cover Removal: Easy Steps for Doing It Yourself
Embarking on DIY pool maintenance is an empowering experience that can save you money and provide a sense of accomplishment. One crucial aspect is knowing how to remove your pool cover, ensuring its longevity and your pool's safety. This comprehensive guide will walk you through the process, from preparation to completion, making the task manageable for anyone to tackle.
Before diving in, ensure you have the right tools: an adjustable wrench, scissors, a pump, and a hose. Having a helper on hand can also make the process smoother and more efficient. Let's get started.
Preparing for Pool Cover Removal
The first step is to ready your pool and its surroundings.Skimming your pool and cleaning the cover will make the removal process smoother.
Begin by skimming your pool to remove any leaves, debris, or small twigs that have accumulated. This will prevent these items from damaging your pool and cover during the removal process. Also, clean the top of the pool cover to ensure no dirt or debris gets back into your pool. A stiff brush or broom should do the trick.
Securing the Pool Cover
Before you start, ensure the pool cover is securely attached to the pool. This could involve either unlocking Winters}-{\emtype\} or twisting locks, or removing safety clips.
For Winters-type locks, use your adjustable wrench to loosen and remove the lock from the cover's anchor. For safety clips, simply remove them by hand or with pliers. Work your way around the pool, removing all locks or clips.
Pumping Out Water
If your solid safety cover is cord-locked or has debris on it, you'll need to pump out any collected water. Failure to do so could cause the cover to be heavy and difficult to handle.
Place your pump on one end of the cover, and allow it to drain. Depending on how much water needs to be removed, you may need to reposition the pump. Be patient, as this could take some time.
Removing the Pool Cover
Now that everything is prepared, it's time to start removing the cover. Caution is key during this step, as the cover can be heavy and slippery.
Start by removing one side of the cover, folding it accordion-style as you go. This method helps to keep the cover organized and under control. Have your helper assist you in holding and folding the cover as you move around the pool.
Dealing with Cables and Springs
If your pool has a track system, you'll need to detach the cables and springs before removing the cover. This involves pulling the cable out of the track and unhooking the springs.
This process can be challenging, as the springs are under tension. It's recommended to use a helper for this step, as it requires careful coordination. Safety glasses are also a good idea to protect against any debris that may fly off during the process.
Final Removal and Storage
With the cables and springs detached, you can remove the cover fully. Continue folding it accordion-style until the entire cover is off the pool. Drape it over a spa or use a cover pump to remove any remaining water.
Once the cover is completely removed, store it in a clean, dry place. It's a good idea to perform some basic maintenance on the cover, such as cleaning and drying it, before putting it away for the season.
Congratulations! You've successfully removed your pool cover. Regular maintenance, including proper removal and storage, will ensure that your pool cover lasts for many seasons to come. Next time, the task should be a breeze. Happy swimming!