how to remove pin style wiper blades

Easy Ways: Remove Pin-Style Wiper Blades

By Hannah Williams
AD

Sick of those pesky pin style wiper blades leaving streaks on your windshield? You're not alone. But don't stress, replacing them is easier than you think.

Before you start, make sure your new blades match the size of your old ones. Most likely, you'll need either a 16", 18", 20", or 22" set. Once you have the perfect fit, it's time to get your hands dirty.

Preparation: Gather Your Tools

First things first, you'll need the right equipment. Grab a flathead screwdriver, your new wiper blades, some glass cleaner, and a lint-free cloth. Optional, but helpful, is a wiper blade removal tool.

AD
2 Minute Tutorial to Change Wiper Blades
2 Minute Tutorial to Change Wiper Blades
How to Replace Your Wiper Blades
How to Replace Your Wiper Blades
a car with the words never replace a wiper blade again, and an arrow pointing to
a car with the words never replace a wiper blade again, and an arrow pointing to

Once you have everything, find a place to work where there's shade and space to lay out your parts. It's always best to replace wipers on a cool, dry day, especially if you're working on a dark-colored car, as heat can make plastic parts harder to handle.

Identify The Type Of Pin Style Blades

Before you start, identify the type of pin style blades you're dealing with. There are three main types: adapter arm, pressure arm, and direct connect.

How often should you change your windshield wiper blades
How often should you change your windshield wiper blades
Windshield wiper blades: How to remove and replace windshield wipers
Windshield wiper blades: How to remove and replace windshield wipers

Adapter arms use a U-shaped hook on the wiper that fits over a small pin. Pressure arms use a pin that pushes against a spring-loaded hook. Direct connect blades fit directly over the wiper arm.

Safety First: Disconnect The Wiper Arm

Start by turning off your car and removing the key from the ignition to prevent any power surges while working with the wipers.

AD

Next, locate the wiper arm and push it to one side, usually toward the driver's side. On some cars, you might need to pull out a little locking pin at the base of the wiper arm to do this. If your wiper arm has a really tight spring, you may need ahelper to pin it down or use a hook tool designed for this purpose.

Removing The Old Wiper Blades

Now that your work area is clear, it's time to remove the old blades. The process varies slightly depending on the type of blades you have.

For adapter arm blades, gently pull the wiper arm towards you to expose more of the pin. Carefully pry the U-shaped hook off the pin using the flat end of your screwdriver. For pressure arm blades, use the screwdriver to gently push the pin in until the pressure is released, then lift the blade off. Direct connect blades simply lift off the wiper arm.

AD

Clean The Windshield

Once the old blades are off, use your glass cleaner to thoroughly clean the windshield where the blades sit. This helps remove any debris and ensures a good seal for the new blades.

While you're at it, clean the new blades too. This might sound counterintuitive, but new blades often have a protective film that can cause streaking if not removed. Apply a little cleaner to the rubber edge of the blade, let it sit, then wipe it off with your lint-free cloth.

Installing The New Wiper Blades

Now comes the fun part. Start by locating the pin or hook on your new blades that corresponds to the type you're installing. For adapter arm blades, this is the U-shaped hook. For pressure arm blades, it's the area designed to fit around the pin. For direct connect blades, it's the entire blade that slides onto the wiper arm.

AD

Carefully place the new blade onto the wiper arm, ensuring the correct end faces the correct direction. For adapter and pressure arm blades, make sure the hook or pin is fully engaged. For direct connect blades, slide the entire blade onto the arm until it's fully seated.

Testing Your New Blades

With the new blades installed, it's time to test them out. Push the wiper arm back into place, then turn on your car. Activate the wipers and watch as they glide smoothly across your clean windshield.

If your new blades leave streaks or don't seem to be making full contact with the windshield, you might need to adjust the blade's position or tension. Most vehicles have a little knob or lever that allows you to do this.

Regular Maintenance For Longer-Lasting Blades

To ensure your new wiper blades last as long as possible, make a habit of checking them regularly. Look for signs of wear, such as cracks or frays in the rubber. If you notice any, replace the blades promptly to prevent further streaking and damage.

Another tip is to lift your wiper blades in snowy or icy weather. This prevents them from freezing to the windshield and causing damage. Always make sure your blades are correctly positioned before driving, and never use your wipers on an icy windshield - it can scratch the glass.

So, there you have it. Replacing pin style wiper blades doesn't have to be a hassle. Just follow these steps and you'll be enjoying streak-free visibility in no time. Safe driving!

AD