how to remove old kitchen faucet

"'How To': A Step-By-Step Guide to Remove Old Kitchen Faucet"

By Robert Miller
AD

Gripping onto a dripping faucet? It's a familiar tale in the kitchen. Old faucets, whether they're leaking, finicky, or just plain worn out, can disturb your culinary peace. But fear not, replacing that old faucet isn't as daunting as making the perfect roux. With a few tools, some patience, and this step-by-step guide, you'll be singing "Whistle While You Work" in no time.

Before we dive elbow-deep into the sink, let's ensure safety is our top priority. Turn off the water supply. To do this, locate the shutoff valves under the sink, which should be right on the supply lines. If the faucet is older, you might need to turn off the water main. Be safe, and turn the handles clockwise until tight.

Preparation: Tools and Workspace

With safety squared away, let's prepare our workspace and gather our tools. You'll need a few basics:

AD
How to Remove and Install a Kitchen Moen Faucet - Keeping it Simple
How to Remove and Install a Kitchen Moen Faucet - Keeping it Simple
How to Remove and Replace Your Kitchen Faucet
How to Remove and Replace Your Kitchen Faucet
How to Remove Kitchen Faucet in 4 Easy Steps - MaterialSix.com
How to Remove Kitchen Faucet in 4 Easy Steps - MaterialSix.com
  • Adjustable wrench
  • Screwdriver (usually Phillips)
  • Teflon tape or plumber's grease
  • Razor blade or scraper

You might also need a channel-lock pliers, a basin wrench, and some rags. So, grab your tool belt, and let's get started!

Access the Faucet Nuts

First, we need to access the faucet nuts, which are secured to the mounting base below the deck. You'll find them under the sink, attached to the water supply lines.

How to Remove Kitchen Faucet Without Basin Wrench
How to Remove Kitchen Faucet Without Basin Wrench
How to Fix a Leaky Faucet
How to Fix a Leaky Faucet

If the faucet has a decorative cover, remove it first. Then, using your channel-lock pliers or an adjustable wrench, loosen and remove the supply lines from the faucet base. Be careful not to damage the pipes.

Disconnect the Water Lines

Once the supply lines are loose, you'll see the faucet base's mounting nuts. These may be hidden behind a permanent retainer ring or a lower seal. If there's a retaining ring, cut it with a razor blade or scraper.

AD

Now, using your adjustable wrench, basin wrench, or even a hammer and punch, carefully remove the mounting nuts. If they're rusted, you might need to spray them with a penetrant and let it sit for a while. Once the nuts are off, you should be able to lift the old faucet out of the mounting base.

Preparing for the New Faucet

With the old faucet removed, your sink is likely a mess. Wipe it down with rags, removing any dirt, rust, or old plumber's putty. Now, it's time to prepare the new faucet for installation.

New faucets often come with detailed instructions. Follow these to ensure a smooth installation. Generally, you'll need to install the faucet body, then mount the handles. Some faucets may have additional components like an escutcheon or sprayer hose.

AD

Install the Faucet Body

First, wrap the faucet's threads with Teflon tape or apply plumber's grease. This will help create a watertight seal and make future maintenance easier. Slide the faucet body into the mounting base and securely fasten it using the mounting nuts. Tighten by hand initially, then use a wrench to snug it.

Some faucets come with a gasket to help create a tight seal. If your faucet has one, make sure to install it before you attach the faucet to the mounting base. Once the faucet body is secure, turn your attention to the faucet handles.

Mount the Faucet Handles

Attach the faucet handles according to the manufacturer's instructions. Typically, you'll use a set screw to secure each handle. Make sure the handles are level and straight, aligning with the spout.

AD

With the handles secure, your new faucet is ready for its maiden voyage. Slowly turn the water supply valves back on, then check your faucet for leaks. If everything is watertight, you're ready to celebrate another DIY victory!

And there you have it! You've successfully removed an old faucet and given your kitchen a fresh facelift. Enjoy your new addition, and don't forget to whistle while you work. Happy cooking!

AD