How to Remove a Norcold Refrigerator in Your RV
Do you find your once-chilled treats now lukewarm in your RV refrigerator? It might be time to remove your Norcold unit for servicing or replacement. Here's a comprehensive, step-by-step guide on how to remove a Norcold RV refrigerator, ensuring safety and precision.
Before you start, ensure you have the necessary tools: a screwdriver (usually Phillips), a wrench, and gloved hands for protection from sharp edges.
Preparation and Safety
The first step is preparation. Turn off your refrigerator's breaker at the electrical panel and unplug the unit from the power source if applicable. Disconnect the water line by turning the shut-off valve clockwise until it stops. This prevents water from leaking while you're working.
For safety, clear the area around your refrigerator and have a trash bag ready for any removed parts or debris.
Accessing the Refrigerator
To reach the bolts securing the RV refrigerator, you'll need to remove the access panel. This is typically located towards the bottom of the unit, and its screws can be removed using a screwdriver. Prying it off gently with a flathead screwdriver can help you get a better grip.
Once the panel is removed, you'll see several bolts. These secure the refrigerator to its brackets and need to be loosened. Using a wrench, turn these bolts counterclockwise until they're loose but not yet completely removed.
Removing the RV Refrigerator
With the bolts loosened, it's time to physically remove the unit. This can be heavy, so have a helper if possible. Gently tilt the refrigerator back and away from the brackets. You may need to wiggle it a bit to get it free.
Now that the refrigerator is out, you can fully remove the bolts. If the RV refrigerator was originally installed using isomount, you'll need to remove these as well. They can be prised off with a flathead screwdriver.
Cleaning and Preparing for Reinstallation
With the old refrigerator out, it's time to clean the area. Wipe down the brackets and the space where the refrigerator sat. This will help prevent any damage to the new unit and make reinstallation smoother.
If you're installing a new refrigerator, make sure it's the correct size and model for your RV. If you're reinstalling the same unit after servicing, ensure all parts are clean and well-functioning.
Preparing the New Refrigerator
If you're installing a new refrigerator, follow the manufacturer's instructions for preparing the unit. This might include., removing transport bolts, attaching shelves, or letting it sit upright for a few hours before plugging it in.
For a Norcold unit, ensure all shelving and drawers are secured, and the door is in the correct position before installation.
Reinstalling the RV Refrigerator
Reinstallation is the reverse of removal. Start by positioning the refrigerator against the brackets. Reattachment might require help due to the weight. Once it's secure, begin tightening the bolts using a wrench. Do this in a diagonal pattern to ensure even pressure.
After the bolts are tight, replace the access panel and its screws. Ensure everything is secure before restoring power and water lines. Let the refrigerator run for a while before checking its operation to ensure it's working correctly.
Congratulations, you've successfully removed and reinstalled your Norcold RV refrigerator! Regular maintenance and careful use will ensure your treats stay cool and refreshing throughout your adventures.