"How To Remove Mossberg 500 Forend
If you're an avid shotgun enthusiast, you might own a Mossberg 500, a versatile and reliable firearm that's known for its customizability. Among the many upgrades you can make, replacing or removing the factory forend is a popular choice. This can help improve the gun's handling, customize its look, or resolve a faulty forend. Here's a step-by-step guide on how to remove the Mossberg 500 forend.
Before we dive in, remember to always follow safety protocols. Unload your firearm, check it twice to ensure it's empty, and keep it pointed in a safe direction. Now, let's proceed with removing the forend.
Understanding the Mossberg 500 Forend
The Mossberg 500 comes with a steel or plastic forend, depending on the model. Both types can be removed and replaced, but the process differs slightly. Let's break down each method.
In this section, we'll discuss the basic setup of the Mossberg 500 forend, which will help you understand how it's attached and how to remove it.
Forend Anatomy and Attachment Points
The Mossberg 500 forend snaps onto the barrel and is held in place by small retaining pins. These pins are located at the front and rear of the forend. Underneath the forend, you'll find a rotating lever that secures the forend to the barrel and operates the pertinent gas system.
Understanding these components is crucial for removing the forend without damaging your firearm. Each type of forend may have slight differences, but the core mechanism remains the same.
Removing the Steel Forend
Removing the steel forend involves breaking the retaining seals and removing the pins. Here's a step-by-step guide:
Remember, you'll need a few tools for this process, including a punch, a hammer, and an oil-based lubricant like Break-Free CLP or Hoppe's No. 9.
Preparation and Safety
First, make sure your Mossberg 500 is unloaded and safe. Apply a small amount of lubricant to the retaining pins and barrel. This will help loosen the pins and prevent them from getting stuck or breaking.
Next, secure your Mossberg 500 in a vise or have someone hold it securely but safely. It's important to keep the firearm stable during this process.
Removing the Retaining Pins
Using your punch, gently tap the centers of the retaining pins. Start with the rear pin first. You want to push the pin out without driving it into the barrel. Be patient, and keep tapping until the pin pops out.
Repeat the process with the front pin. If you encounter resistance, apply more lubricant and continue tapping gently. If the pin still won't budge, you may need to use a longer punch or a tool specifically designed for this purpose.
Removing the Plastic Forend
The plastic forend on the Mossberg 500 is held in place by a slightly different mechanism. Here's how to remove it:
For this process, you'll need a roll pin punch or a drift punch, a hammer, and some oil-based lubricant.
Preparation and Safety
Again, ensure your Mossberg 500 is unloaded and safe. Apply lubricant to the roll pins and forend. Secure the firearm in a vise or have someone hold it steady.
The plastic forend has two roll pins: one at the rear, near the receiver, and one at the front. Start by removing the rear pin.
Removing the Roll Pins
Using your roll pin punch and hammer, gently tap the pin out. Start from the top (or underside) of the pin and work your way around the pin's circumference. This helps prevent the pin from being driven into the barrel.
Once the rear pin is out, repeat the process with the front pin. If you encounter resistance, apply more lubricant and continue tapping gently. If the pin still won't budge, use a longer punch or a tool specifically designed for this purpose.
Now that you know how to remove the Mossberg 500 forend, you can customize your shotgun to your heart's content. Whether you're installing a new Tactical forend, a Ventilated rubber forend, or a custom wood forend, the process remains the same. Just remember to follow safety protocols and take your time. Happy shooting, and enjoy your customized Mossberg 500!