how to remove lawn mower flywheel

How to Remove a Lawn Mower Flywheel: Step-by-Step Guide

By Matthew Rodriguez
AD

Ever found yourself in the middle of a lawn mowing session, only to have your mower stop dead in its tracks? Frequently, the culprit behind this frustrating ordeal is a faulty flywheel. But don't worry, you don't need to rush to the repair shop just yet. In this guide, we'll walk you through the process of how to remove a lawn mower flywheel, step by step. By the end, you'll be ready to get your mower back in action and tackle that unruly lawn.

Before we dive in, a quick safety note: Always ensure your mower is off and cooled down before starting any repairs. Now, let's get started.

Identifying the Lawn Mower Flywheel

The flywheel is a crucial component in your lawn mower's engine. It's a large, heavy disc found at the front of your mower's engine, attached to the crankshaft. Its primary function is to maintain a consistent engine speed during operations. If your mower is experiencing issues like sudden power loss or difficulty starting, a damaged flywheel might be the cause.

AD
How to replace a lawn mower flywheel key on an OHV engine | Repair guide
How to replace a lawn mower flywheel key on an OHV engine | Repair guide
Easy Method To Remove A Lawn Mower Flywheel If You Don't Have Special Tools!
Easy Method To Remove A Lawn Mower Flywheel If You Don't Have Special Tools!
a person is holding a wrench to the side of a red motorbike
a person is holding a wrench to the side of a red motorbike

Removing the flywheel involves several steps, including disassembling the mower and using specific tools. Let's break down the process into manageable sub-topics.

Gather Your Tools and Prepare Your Workspace

Before you begin, ensure you have all the necessary tools. You'll typically need:

an old red and black fire hydrant sitting on top of green grass next to a field
an old red and black fire hydrant sitting on top of green grass next to a field
9 Fixes For When Your Lawn Mower Won’t Start
9 Fixes For When Your Lawn Mower Won’t Start
  • Socket wrench with the appropriate socket size
  • Pliers
  • Needle-nose pliers
  • Hammer (small, suitable for tapping)
  • Screwdriver set
  • WD-40 or another high-viscosity lubricant

Next, choose a well-lit, clean workspace. Lay out an old sheet or drop cloth to catch any fallen parts or spilled lubricant.

Disassemble the Mower

To access the flywheel, you'll need to partially disassemble your mower. Follow these steps:

AD
  1. Tip the mower onto its side, ensuring the air filter and engine oil are accessible.
  2. Remove the spark plug wire to prevent any accidental starts.
  3. Drain the engine oil by tilting the mower and unscrewing the oil plug at the bottom of the engine (consult your user manual for the exact location).
  4. Unscrew and remove the air filter housing and the air filter.
  5. Use a socket wrench to unscrew and remove the engine cover. You may need to use a screwdriver to first pry off any clips or fasteners.

With the engine cover removed, you should now have a clear view of the flywheel.

Removing the Lawn Mower Flywheel

Now that you've accessed the flywheel, it's time to remove it. The process may vary slightly depending on your mower's make and model, but the following is a general guide.

Before you begin, apply some WD-40 or another high-viscosity lubricant around the flywheel's bolt. This will help loosen any rusted or stubborn bolts. After applying the lubricant, wait a few minutes to let it work its magic.

AD

Removing the Flywheel Bolts

Use a socket wrench to unscrew and remove the flywheel bolts. You may need to use a hammer and a flathead screwdriver to gently tap the wrench if the bolts are particularly tight. Be careful not to damage the bolts or the flywheel.

Once you've removed all the bolts, you should be able to cautiously lift off the flywheel. If it doesn't budge, it may be stuck due to baked-on oil or rust. In this case, you might need to use a gear puller to extract the flywheel safely.

Extracting the Flywheel with a Gear Puller

If the flywheel is stuck, follow these steps to use a gear puller:

AD
  1. Insert the gear puller's claws into the flywheel's central hole.
  2. Adjust the puller's center bolt until it's firmly against the back of the flywheel.
  3. Tighten the bolt using a wrench, gradually applying more pressure until the flywheel breaks free.
  4. Once the flywheel is loose, slowly loosen the bolt and remove the gear puller.

With the flywheel removed, you can now inspect it for any damage. If it's seized or warped, it will need to be replaced. If it's still in good condition, you can clean it up and reuse it.

Remember, replacing the flywheel is just one part of the troubleshooting process for your lawn mower's issues. After replacing or cleaning the flywheel, reassemble your mower and see if the problem persists. If not, you're ready to tackle that lawn!

AD