how to remove kwikset cylinder

How to Remove Kwikset Cylinder: Expert Tips

By Joshua White
AD

Are you done with your Kwikset lock and looking to replace it or move on to a different brand? Before you tackle the next step, you need to learn how to remove the Kwikset cylinder properly. This process isn't as daunting as it might seem, and with the right guidance, you can have your old lock out and your new one ready to go in no time. Let's dive into a step-by-step guide to help you master this task.

Before we get started, it's crucial to have the right tools at hand. You'll need a set of basic lock picking tools, which you can purchase from any hardware store. Don't worry; this isn't as ominous as it sounds. These tools are used for removing lock cylinders, not picking locks at night like a movie-style burglar. Once you've gathered your tools, you're ready to tackle the Kwikset cylinder removal.

Understanding Your Kwikset Lock

Before we dive into the removal process, let's gain a better understanding of your Kwikset lock. Kwikset locks are known for their versatility, offering both keyed and keyless options. In this guide, we'll focus on the standard Kwikset doorknob with a keyed cylinder. If you're working with a different model, some steps might vary, but the basic principles will remain the same.

AD
How to remove the lock cylinder from a Kwikset SmartKey entry knob
How to remove the lock cylinder from a Kwikset SmartKey entry knob
UPDATED: How to remove Kwikset Smartkey lock cylinder - for a lever lock set
UPDATED: How to remove Kwikset Smartkey lock cylinder - for a lever lock set
(118) How to Remove the Cylinder from a Kwikset Door knob
(118) How to Remove the Cylinder from a Kwikset Door knob

The Kwikset cylinder is secured within the lock using two set screws. These small screws hold the cylinder in place and must be removed before you can take out the cylinder. In the following sections, we'll guide you through removing these set screws and extracting the cylinder for easy replacement.

Gathering Your Tools

As mentioned earlier, you'll need a set of basic lock picking tools for this task. Specifically, you'll need:

How to remove the lock cylinder and Broken Key from a Kwikset Entry Knob
How to remove the lock cylinder and Broken Key from a Kwikset Entry Knob
How do I remove a Kwikset deadbolt with no screws on the inside plate?
How do I remove a Kwikset deadbolt with no screws on the inside plate?
  • A tension wrench (also known as a torque wrench or picks)
  • A set of lock picks, such as a hook or rake (you'll use one of these to manipulate the set screws)

Having the correct tools ensures a smooth and efficient process. Now that you're equipped let's delve into the step-by-step guide to remove the Kwikset cylinder.

Preparing the Lock

Before you begin removing the cylinder, you need to prepare the lock by disengaging the latch mechanism:

AD
  1. Turn the lock to the unlocked position.
  2. Remove the knob or lever by unscrewing the setscrew on the interior side (the side opposite the keyhole).
  3. With the knob removed, you'll see the latch mechanism. Some models might require you to remove a collar or a retaining ring before extracting the latch.

Once you've disengaged the latch mechanism and removed the collar or retaining ring (if applicable), it's time to focus on the cylinder itself.

Removing the Set Screws

The set screws secure the cylinder within the lock assembly. To remove them, you'll need to manipulate them using your lock picking tools:

  1. Insert the tension wrench into the keyway, with the bend (or "hook") facing the unlocking direction (usually toward the bottom of the lock). Apply gentle tension by rotating the wrench clockwise.
  2. Insert one of your lock picks (like a hook or rake) into the keyway and use it to "feel" for the set screws. The set screws will likely be at the 12:00 or 6:00 position, but their exact location may vary.

Once you've located the set screws, use your pick to manipulate them, turning them counterclockwise until they're completely out. You might need to change the direction of the tension to counter the set screw's resistance. Keep in mind that some force is required to remove the set screws, so don't be afraid to apply steady pressure.

AD

Extracting the Kwikset Cylinder

Now that you've removed the set screws, the cylinder is ready to be extracted from the lock assembly:

Inserting the Lock Picks

You'll use your lock picks to engage the cylinder retention balls and pull the cylinder out:

  1. Insert the tension wrench back into the keyway if you've removed it.
  2. Insert your lock pick back into the keyway and use it to engage the cylinder retention balls. The balls should pop out, allowing the cylinder to be released from the lock.

Retracting the Cylinder

With the cylinder retention balls disengaged, you can now retract the cylinder:

AD
  1. Using your tension wrench, apply light tension in the unlocking direction (usually counterclockwise).
  2. With tension applied, pull the cylinder gently but firmly out of the lock assembly.

If you've completed the previous steps correctly, the cylinder should come out smoothly. If you encounter resistance, double-check that you've engaged all retention points and removed any remaining set screws or other obstructions.

Congratulations! You've successfully removed the Kwikset cylinder from your lock. Now you're ready to install a new cylinder or proceed with another locksmithing task. If you ever find yourself in a similar situation again, you'll have the confidence and knowledge to tackle the challenge head-on. Happy locksmithing, and may your future encounters with Kwikset cylinders be smooth and successful.

AD