how to remove knockouts from plastic electrical box

How to Remove Knockouts from Plastic Electrical Box

By Rachel Anderson
AD

Ever found yourself in a bind due to knockouts in your plastic electrical box? Don't let these small holes leave you in the dark, literally and metaphorically. Here's a comprehensive guide on how to remove knockouts, ensuring safety and aesthetic appeal in your electrical setup.

First, let's understand what electrical box knockouts are. They are the circular areas in your plastic electrical box that can be punched out to accommodate wires of different sizes. While they serve a purpose, sometimes they can leave your box looking untidy or may even pose safety hazards if not managed correctly.

Why and When to Remove Knockouts

Removing knockouts becomes necessary when you've completed your wiring project, or when you want to ensure a snug fit for your electrical components. It's also crucial for safety, as exposed knockouts can be a fire hazard, especially in high-amperage or high-voltage circuits.

AD
Quick and easy repair of stripped and broken plastic electrical boxes
Quick and easy repair of stripped and broken plastic electrical boxes
How To Hide That Ugly Utility Box In Your Yard!
How To Hide That Ugly Utility Box In Your Yard!
Hold Onto Your Magnets for These 16 Ingenious Ideas
Hold Onto Your Magnets for These 16 Ingenious Ideas

Moreover, removing knockouts gives your electrical box a clean, professional look, which is particularly important in visible or accessible areas of your home or business.

Tools Needed

Before you start, gather the following tools to ensure a smooth process:

How to Hide Electrical Boxes On Your House - Stacy Risenmay
How to Hide Electrical Boxes On Your House - Stacy Risenmay
How to Fix an Oversize Electrical Box Cutout
How to Fix an Oversize Electrical Box Cutout
  • Needle-nose pliers
  • Wire stripper
  • Utility knife
  • Sandpaper (fine grit)
  • Safety glasses

Step-by-Step Guide to Removing Knockouts

Now that you have your tools ready, let's dive into the step-by-step process of removing knockouts from your plastic electrical box.

1. **Preparation**: Start by turning off the power to the circuit you'll be working on. Always prioritize safety when dealing with electrical work. Use a voltage tester to confirm that the power is off.

AD

2. **Locate and Mark**: Identify the knockouts you want to remove. If you're unsure about the size, mark the area with a pencil. This will help you avoid removing the wrong knockout later on.

3. **Scoring the Knockout**: Using a utility knife, carefully score around the knockout. This makes the knockout removal process easier and less likely to cause damage to the box. Be careful not to score too deeply, as this could weaken the integrity of the box.

4. **Removing the Knockout**: Using your needle-nose pliers, grab the scored knockout and gently pull upwards. It should pop out relatively easily. If it's resistant, try moving the pliers to a different part of the knockout and try again. Be careful not to damage the surrounding plastic.

AD

5. **Cleaning Up**: Once the knockout is removed, use sandpaper to smooth out any rough edges. This prevents injury and makes the area easier to work with.

Dealing with Larger Knockouts

For larger knockouts, the process is largely the same, but you may need to use a different tool. A cutoff wheel or a grief can help you score and remove larger knockouts. Remember to wear safety glasses and appropriate clothing to protect yourself from debris.

Also, ensure that the knockout is large enough to accommodate the wires. If it isn't, you may need to remove a larger knockout or use a reducing bushing to accommodate the wires.

AD

Repairing Damaged Areas

If the plastic electrical box becomes damaged during the knockout removal process, you'll need to repair it. This can often be done using a plastic repair kit, which can be found at most hardware stores. These kits typically include a plastic welding tool and a rod of plastic welding material that matches the color of your electrical box.

First, clean the area to be repaired. Then, use the plastic welding tool to heat the welding rod. Once the rod is hot enough, apply it to the damaged area. The plastic will melt and fill in the damaged area. Allow the repaired area to cool completely before testing it.

In the end, removing knockouts from your plastic electrical box is a straightforward process that can significantly improve the safety and appearance of your electrical setup. Always remember to prioritize safety when dealing with electrical work, and if you're unsure about any aspect of the process, don't hesitate to consult a professional electrician.

AD