how to remove keurig water reservoir

Keurig Water Reservoir Removal: Easy Step-by-Step Guide

By James Robinson
AD

Every once in a while, even the most reliable coffee makers, like the Keurig, need a little TLC. One of the most frequent maintenance tasks is cleaning, and one of the key components to clean is the water reservoir. Over time, mineral build-up and rust can accumulate, affecting both the taste of your coffee and the machine's performance. So, we're here to guide you through the process of how to remove and clean your Keurig water reservoir, ensuring your coffee maker remains in tip-top shape.

Before we dive into the step-by-step process, remember that Keurig machines are designed to be user-friendly. The water reservoir is easily accessible and removable, making the cleaning process a breeze. It's recommended to clean your Keurig water reservoir every 3 to 6 months for optimal performance and to keep your coffee tasting fresh. So, let's get started!

Removing the Water Reservoir

The first step in cleaning your Keurig water reservoir involves, well, removing it. Fret not; it's as simple as follows:

AD
Keurig Not Dispensing Water - How to Resolve This?
Keurig Not Dispensing Water - How to Resolve This?
How to Drain a Keurig in 5 Minutes: Our Simple Guide (With Pictures!)
How to Drain a Keurig in 5 Minutes: Our Simple Guide (With Pictures!)
How To Drain Water Out Of The Keurig Coffee Pot - Hunker
How To Drain Water Out Of The Keurig Coffee Pot - Hunker

1. **Turn off and unplug** your Keurig machine from the power source to ensure electrical safety.

2. **Lift up the handle** of your Keurig to reveal the water reservoir. Gently grasp the base of the reservoir from the sides and **pull it straight up and out** of the machine.

Keurig Reservoir Hack
Keurig Reservoir Hack
How Long Can You Leave Water In A Keurig Reservoir?
How Long Can You Leave Water In A Keurig Reservoir?

Are You Using a Keurig 2.0 Model?

If you're a proud owner of a Keurig 2.0 model, you might notice an additional step:

1. **Turn the water reservoir** to unlock it from the machine. Once unlocked, **pull it out** to remove it from the Keurig.

AD

Pro tip: Remember which way you turn the reservoir to unlock it. You'll need to know how to lock it back in place when you're done cleaning.

Identifying the Reservoir Type

Before we proceed with the cleaning process, let's quickly differentiate between the two common types of Keurig water reservoirs:

  • Internal reservoir: Located inside the machine, these reservoirs are typically found in older Keurig models.
  • External reservoir: An improvement over the internal type, these reservoirs are removable and designed for easier access and cleaning. They're available in various sizes and can be found in most modern Keurig models.

Now that you've removed your water reservoir, it's time to prepare it for a thorough cleaning!

AD

Cleaning the Water Reservoir

Keurig recommends using a mixture of white vinegar and water to clean the water reservoir. If you're not a fan of vinegar, you can also use a mild detergent and warm water. Here's how to proceed:

1. **Fill the reservoir with a mixture of equal parts white vinegar (or mild detergent) and warm water**. Ensure the mixture reaches the 'max fill' line indicator.

2. **Allow the mixture to soak** in the reservoir for about 30 minutes to an hour. This gives the cleaning agent enough time to break down any mineral build-up and remove any lingering coffee or tea stains.

AD

Scrubbing the Reservoir

After the soaking period, it's time to give your water reservoir a good scrub. Use a soft-bristled brush or a clean cloth to gently scrub the inside of the reservoir. Pay special attention to the sides and the bottom, where mineral build-up is most likely to accumulate.

Pro tip: Be careful not to damage the reservoir's internal components during the scrubbing process. Gentle, circular motions should suffice.

Rinsing the Reservoir

Once you're satisfied with the cleanliness of your reservoir, it's time to rinse out the cleaning solution. Here's how:

  • **Rinse the reservoir thoroughly** with clean, cold water. Fill it to the 'max fill' line, then empty and repeat the process until the reservoir is free of any vinegar or detergent residue.
  • **Fill the reservoir with clean water** one last time and let it sit for about 10 minutes. This helps to remove any remaining soap or vinegar residue that you might have missed during the initial rinsing.

Reinstalling the Water Reservoir

Whether you have an internal or external reservoir, reinstalling it is a breeze:

1. **Insert the reservoir** back into the machine. For Keurig 2.0 models, ensure you're aligning it correctly and turning it to lock it into place.

2. **Gently push the reservoir down** until you hear a clicking sound, indicating that it's securely fastened back in place.

3. **Lower the handle** back into position, and you're good to go! Your Keurig machine is now ready to brew another delicious cup of coffee.

Regular Maintenance for Optimal Performance

To keep your Keurig water reservoir in top shape, remember to clean it regularly. As a general rule, aim to clean it every 3 to 6 months, or more frequently if you notice a decrease in water flow or coffee quality. Additionally, consider performing a monthly descaling cycle on your Keurig machine to remove mineral build-up from the internal components.

Regular maintenance not only ensures that your coffee tastes fresh but also extends the lifespan of your Keurig machine. So, make a habit of cleaning your water reservoir, and enjoy your coffee maker for years to come!

And there you have it! You're now a pro at removing and cleaning your Keurig water reservoir. With a little elbow grease and a regular cleaning schedule, your Keurig machine will continue to brew the perfect cup of coffee, just the way you like it. Happy brewing!

AD