how to remove jets from whirlpool tub

How to Remove Jets from Whirlpool Tub

By Michael Thompson
AD

If you're looking to remove jets from your whirlpool tub, you're not alone. While jets can be relaxing, they may not be necessary or desired in every situation. Alternatively, you might want to replace them with something else. Whatever your reason, it's a straightforward process with the right tools and knowledge. Let's dive into a step-by-step guide on how to remove jets from your whirlpool tub.

Before we begin, it's crucial to understand that removing jets from a whirlpool tub involves dealing with plumbing. While it's not typically a difficult task, it does require some basic plumbing knowledge and the right tools. It's also essential to ensure the tub is empty and unplugged before starting to prevent any injuries or electrical issues.

Safety Precautions and Preparation

The first step in removing jets from your whirlpool tub is safety. Always ensure the tub is empty and unplugged before starting. Also, turn off the water supply valves located behind or underneath the tub to prevent water from shooting out when you remove the jets.

AD
Learn How to Determine Which Jets You Need in Your WHIRLPOOL JETTED BATH TUB
Learn How to Determine Which Jets You Need in Your WHIRLPOOL JETTED BATH TUB
The Best Way to Clean a Jetted Tub, So You'll Actually Want to Use It
The Best Way to Clean a Jetted Tub, So You'll Actually Want to Use It
How To Clean Whirlpool Tub Jets - Simply Organized
How To Clean Whirlpool Tub Jets - Simply Organized

Next, gather your tools. You'll need a screwdriver, adjustable wrenches, an adjustable pliers, Teflon tape, and a basin or container to catch any water that may drip out. Have a towel nearby as well to clean up any spills.

Accessing the Jets

Depending on your tub model, you might need to remove one or more panels to access the jets. Typically, these panels are secured with screws. Use your screwdriver to remove them, being careful not to lose any screws. Some tubs may have jets that are easily accessible without panel removal.

How to Clean and Disinfect Jetted Whirlpool Tubs
How to Clean and Disinfect Jetted Whirlpool Tubs
How to Clean and Whiten Yellowed Bathtub Jets: My Real Results
How to Clean and Whiten Yellowed Bathtub Jets: My Real Results

If the jets are positioned beneath the waterline, you might need to drain some water from the tub to get a clear view and easy access. Use a submergible pump or a pitcher to bail out some water.

Disconnecting the Jets

Once you've accessed the jets, you'll see that they are held in place by nuts and bolts. Use your adjustable wrenches to loosen and remove these. You might need to use an adjustable pliers for stubborn nuts. Be careful not to damage the jet or the tub.

AD

Next, disconnect the water hoses connected to the jets. These are usually held in place by clamps. Carefully remove the clamps and pull off the hoses. Have your basin or container ready to catch any remaining water.

Sealing the Holes

With the jets removed, you're left with open holes where the water and air used to flow. These need to be sealed to prevent water from seeping in when you refill the tub.

To seal these holes, you can use a product like Plumber's Putty or silicone caulk. Apply a generous amount around the hole, then press a suitable rubber or plastic plug into the hole. Wipe away any excess sealant with a damp cloth.

AD

Sealing with Plumber's Putty

Plumber's Putty is a moldable, dough-like substance that creates a watertight seal. Roll a small portion of the putty into a snake-like shape, then wrap it around the plug. Insert the plug into the hole and twist it until it's secure. Any excess putty can be wiped away.

Once the putty has dried, you can test the seal by filling the tub with water. If no water leaks, your seal is successful. If not, you may need to try again with a different method or a different plug size.

Sealing with Silicone Caulk

Silicone caulk is a flexible, waterproof sealant that's easy to apply. First, clean the area around the hole with rubbing alcohol to ensure a good bond. Then, apply a bead of caulk around the plug, pressing it firmly into place. Wipe away any excess caulk with a damp cloth.

AD

Allow the caulk to dry according to the package instructions before testing the seal. Like with Plumber's Putty, if water leaks, you may need to try again with a different method or a different plug size.

Reassembling the Tub

With the holes successfully sealed, it's time to put your tub back together. Reinstall any panels you removed earlier, ensuring the screws are securely in place. If you drained any water from the tub, it's now safe to refill it.

Finally, turn the water supply valves back on. Check for any leaks around the sealed jets. If no leaks are present, your tub is now ready for use without the jets.

Removing jets from your whirlpool tub can dramatically change its functionality and aesthetic. If you found this guide helpful, please share it with others who might be interested. Happy renovating!

AD