how to remove iron head from shaft

How to Easily Remove Iron Head from Golf Shaft

By Nicole Martin
AD

Have you been struggling with a rusted or stubborn iron head on your golf club, lawn mower, or tool? Removing an iron head from its shaft can be a challenging task, but with the right techniques and tools, it's definitely achievable. This guide will walk you through the process, ensuring you can successfully remove the iron head without causing any further damage.

Before we dive into the process, it's crucial to gather the necessary tools. You'll need a torque wrench, an impact wrench or a socket wrench, anti-seize compound or motor oil, and a suitable replacement insert orExtractor for the new head.

Preparation and Safety Measures

The first step in removing an iron head is to prepare your workspace and ensure safety. Choose a well-lit, stable surface to work on, and clear the area of any obstructions. Also, wear safety glasses to protect your eyes from any debris that might fly off during the process.

AD
Easy Golf Shaft Removal Fix Repair DIY At Home
Easy Golf Shaft Removal Fix Repair DIY At Home
1.4K views · 155 reactions | Everyone is BAD at Irons until they learn this! (Part 6) The Most Dangerous Iron Miss in Golf… The Shank. That low rocket to the right (for right-handers)… Or low left (for lefties)… You think it’s off the toe. It’s not. You’re catching the hosel. And once it starts? It can mess with your head fast 😬 Here’s the simplest fix I’ve used with hundreds of players 👇 📦 The Box Drill Place a small box just outside the ball So there’s barely any space between the toe of the club and the box. Now hit shots. If you hit the box? You’re delivering the hosel. No box? Roll up a towel or use a headcover. Same idea. 🎯 The goal: Hit the ball. Miss the box. Shot after shot after shot. Why this works: Shanks usually happen with wedges and short irons. Those clubs are steeper. If your backswing gets too flat, the club moves away from you in transition — and it only takes a tiny move to catch the hosel. So if you’re battling: ❌ low right rockets ❌ random hosel shots ❌ shanks with wedges ❌ fear standing over the ball This drill will rebuild your strike fast. Shanks aren’t permanent. They’re just a delivery problem. Fix the space. Fix the contact. | The Golf Sensei | Facebook
1.4K views · 155 reactions | Everyone is BAD at Irons until they learn this! (Part 6) The Most Dangerous Iron Miss in Golf… The Shank. That low rocket to the right (for right-handers)… Or low left (for lefties)… You think it’s off the toe. It’s not. You’re catching the hosel. And once it starts? It can mess with your head fast 😬 Here’s the simplest fix I’ve used with hundreds of players 👇 📦 The Box Drill Place a small box just outside the ball So there’s barely any space between the toe of the club and the box. Now hit shots. If you hit the box? You’re delivering the hosel. No box? Roll up a towel or use a headcover. Same idea. 🎯 The goal: Hit the ball. Miss the box. Shot after shot after shot. Why this works: Shanks usually happen with wedges and short irons. Those clubs are steeper. If your backswing gets too flat, the club moves away from you in transition — and it only takes a tiny move to catch the hosel. So if you’re battling: ❌ low right rockets ❌ random hosel shots ❌ shanks with wedges ❌ fear standing over the ball This drill will rebuild your strike fast. Shanks aren’t permanent. They’re just a delivery problem. Fix the space. Fix the contact. | The Golf Sensei | Facebook
Golf Club Shaft and Club Head Replacement
Golf Club Shaft and Club Head Replacement

Next, locate the hosel - the part where the iron head meets the shaft. This is where you'll apply pressure to loosen and eventually remove the iron head.

Using an Impact Wrench or Socket Wrench

If your iron head is securely fastened with an Allen wrench or a Torx bolt, you'll need to use an impact wrench or socket wrench to remove it.

Can I fix this?
Can I fix this?
HOW TO HIT IRONS HIGHER (STEP-BY-STEP GUIDE)
HOW TO HIT IRONS HIGHER (STEP-BY-STEP GUIDE)

First, apply a few drops of anti-seize compound or motor oil onto the bolt to help loosen it. Then, attach the appropriate socket or adapter to the impact wrench or socket wrench. Apply steady pressure, and gradually increase the torque until the bolt starts to loosen. Be cautious not to overtighten, as this could strip the bolt or damage the thread.

Removing a Stubborn Iron Head

If the iron head is too tight or rusted, you might need a more aggressive approach. In this case, an iron head Extractor can be useful. This tool is designed to grip the inside of the hosel and pull the head off.

AD

First, use a center punch or a small drill bit to create a hole in the hosel's center. Next, insert the Extractor's tap into the hole and thread it in by hand. Once it's securely fastened, use a wrench to turn the Extractor counterclockwise, applying steady pressure until the iron head pops off.

Installing the New Iron Head

Now that the old iron head is removed, it's time to install the new one. Ensure the new head is compatible with your shaft and that you have the correct-sized insert or washer.

Before installation, apply a small amount of anti-seize compound or grease to the insert or washer to prevent seizing in the future. Then, thread the shaft through the new iron head and slide the insert or washer into place. Tighten the bolt using a torque wrench, following the manufacturer's recommended torque settings.

AD

Re-assembly and Re-gripping

Once the new iron head is securely fastened, re-attach theoriginal grip or apply a new one if necessary. Use double-sided tape or grip solvent to ensure a strong bond between the grip and the shaft. Wrap the grip material around the shaft and smooth it out, working from the butt end to the top.

After the new grip is in place, trim any excess material with a sharp knife or utility blade. Allow the club to sit upright for at least 24 hours to let the grip cure and bond properly.

There you have it! With these steps, you should be able to successfully remove an iron head from its shaft and replace it with a new one. Happy golfing or DIY-ing, and remember - safety first!"

AD
AD