how to remove ikea hex bolts

How to Remove IKEA Hex Bolts: A Simple Step-by-Step Guide

By Robert Clark
AD

Ever found yourself in a pickle trying to remove stubborn IKEA hex bolts? You're not alone. Ikea's furniture is renowned for its simplicity, but sometimes simplicity can make disassembly a headache. Never fear, with the right technique and a bit of patience, you can remove those hex bolts like a pro. Let's dive into the world of Allen wrenches and explore how to remove IKEA hex bolts with ease.

Firstly, let's understand what we're dealing with. IKEA uses Allen bolts, also known as hex head bolts, for many of their furniture pieces. Allen bolts have a hexagonal socket in their head, allowing you to tighten or loosen them using an Allen wrench or hex key. Now that we're on the same page, let's get started!

Gathering Your Tools

Before you start, make sure you have the right tools for the job. You'll need an Allen wrench or hex key that fits the bolt. IKEA uses mostly 4mm and 5mm Allen wrenches for their furniture. If you're unsure, check your IKEA assembly instructions or use the 'What's My Allen Size?' tool on IKEA's website.

AD
How To Remove A Stripped Hex Nut
How To Remove A Stripped Hex Nut
5 Easy Tricks HOW to Remove Rounded Stripped Allen Hex Bolts FCA Screw
5 Easy Tricks HOW to Remove Rounded Stripped Allen Hex Bolts FCA Screw
How to remove rounded Allen head bolts | remove rounded hex key bolts 8 different ways
How to remove rounded Allen head bolts | remove rounded hex key bolts 8 different ways

Besides your Allen wrench, you might also want to have a rubber mallet on hand. This can help to loosen stubborn bolts by tapping around the joint. Now that you're armed with the right tools, let's move on to the next step.

Preparation Before Removal

Before you start, ensure the furniture is in a stable and comfortable position. You don't want it wobbling around or toppling over mid-disassembly. If necessary, partially disassemble the piece to make access to the bolts easier.

5 Smart Hacks to Extract a Stubborn Hex Screw Without a Tool!
5 Smart Hacks to Extract a Stubborn Hex Screw Without a Tool!
How to Remove a Broken Bolt
How to Remove a Broken Bolt

If the furniture has been assembled for a while and the bolts have seized up, you might need to prepare them with some lubricant. Use a few drops of remover oil or WD-40 on the bolts to help loosen them. Let it sit for a few minutes to allow the lubricant to penetrate the bolt.

Removing IKEA Hex Bolts

Now that you're all set, it's time to start removing those hex bolts. Remember, patience is key here. You don't want to force the bolt and risk stripping or breaking it. Here are some steps to guide you:

AD

Identifying the Bolt Head

First, locate the hex bolts you want to remove. They might be hidden or hard to reach, so take your time. Once you've found them, identify the size of the bolt head. You should see markings or the bolt size (usually 4mm or 5mm) printed near the bolt.

If the size isn't visible, you might have to try different Allen wrench sizes to find the right fit. Start with the most common sizes (4mm or 5mm) and work your way up or down as needed.

Direct Pressure and Counter-clockwise

Once you've identified the bolt size and found the right Allen wrench, it's time to remove the bolt. Insert the Allen wrench into the bolt's hexagonal socket. Apply steady, direct pressure downwards with the wrench. Be careful not to lean on the furniture piece, as this could cause instability.

AD

Turn the wrench counter-clockwise to loosen the bolt. You should feel the bolt turning slowly. If it feels unresponsive, try tapping theAround the socket with a rubber mallet to help the lubricant break the seizure. If the bolt still won't budge, it might be time to call for backup, like a larger Allen wrench or even a drill if the situation is desperate and the bolt isn't too deep.

Disassembly and Reassembly

With the bolts removed, it's time to disassemble the furniture piece. Follow your IKEA assembly instructions in reverse to do this correctly. If you don't have the instructions, try to make a mental map of how the piece goes together.

When you're done disassembling, remember to keep the bolts and any other hardware in a safe place. You never know when you might need to reassemble the piece in the future. Also, don't forget to label and store your Allen wrenches properly to avoid lost or mixed sizes.

AD

Re-asembly: Reversed Order

If you plan to reassemble the furniture, follow the assembly instructions in reverse order. Start by attaching the largest pieces first, then work your way down to the smaller details. Make sure to use the same bolts in the same holes for a correct fit.

When reattaching the hex bolts, apply them by hand first, then use the Allen wrench to tighten them. Remember not to overtighten, as this can strip the bolts or damage the furniture.

And there you have it! You're now an expert in removing IKEA hex bolts. Just remember, patience and the right tools are your friends. Happy disassembling!

AD