How to Replace Frigidaire Gallery Water Filter
Tired of dealing with low water quality or the tell-tale signs of a clogged water filter? It's time to remove your Frigidaire Gallery water filter and replace it with a fresh one. This comprehensive guide will walk you through a simple, step-by-step process to help you achieve this.
Before you start, gather your tools: a bowl or cup to catch water, a flathead screwdriver, and a new Frigidaire water filter (model WF2950073). Ready? Let's dive in.
Preparation and Shut-Down
First, locate your Frigidaire Gallery water filter. It's usually positioned behind the bottom grille of your refrigerator.
Turn off both the water supply and the ice maker/on demand water dispenser. To do this, twist the knobs at the back of your fridge clockwise until they're fully tightened. This prevents messy leaks while you work.
Accessing the Filter Housing
Next, remove the grille at the bottom of your fridge. Most models have a single panel that lifts off. If it's secured with screws, carefully remove them using your flathead screwdriver.
With the grille off, you'll see the water filter housing. Position a bowl or cup underneath to catch any water that might drip out.
Removing the Old Filter
The old filter will be gripped by a couple of plastic tabs. To release it, firmly push in the middle of the filter while pulling it out and down in one motion. You should hear the tabs click and release.
Completely remove the old filter. Wipe away any excess water with a cloth. Now, you're ready for the new filter.
Installing the New Filter
Your new Frigidaire water filter may have a semi-permeable membrane inside. If it does, don't worry—it's meant to be that way.
Before installation, run water through the filter by holding it under a tap and turning it on for around 10 seconds. This primes the filter and prevents air from being trapped inside your water system.
Aligning and Attaching the New Filter
Before installing, ensure the filter's arrow points towards the front of your fridge, indicating the direction of water flow.
Press the filter firmly into the housing. You should hear the plastic tabs click into place. Hold the filter for about 5-10 seconds to ensure it's securely attached.
Turning on the Water Supply
Slowly turn the knobs at the back of your fridge counter clockwise to open the water supply.
To confirm the filter is working correctly, dispense water from the on demand feature for about 10 seconds. The water may taste slightly differently due to the fresh filter, but this should fade within 24 hours.
Congratulations! You've successfully removed your old Frigidaire Gallery water filter and installed a new one. To maintain ideal water quality, remember to replace the filter every six months or according to your fridge's display indicator (whichever comes first). Keep up this routine, and fresh, great-tasting water will always be ready for you.