how to remove ford body mount bushings

How to Remove Ford Body Mount Bushings

By Sarah Hernandez
AD

Reviving the performance and comfort of your Ford vehicle often involves addressing worn-out components like body mount bushings. Over time, these bushings degrade, leading to excessive noise, vibration, and harshness (NVH), as well as poor handling. This guide walks you through the process of how to remove Ford body mount bushings, ensuring better control and comfort behind the wheel.

Before we dive into the removal process, it's essential to gather the right tools and prepare your workspace. You'll need a jack, jack stands, a set of sockets, a bungee cord or wire coat hanger, and some penetrating oil like WD-40 or PB Blaster. Also, make sure your work area is clean and level to ensure safety during the procedure.

Preparation and Accessing the Body Mount Bushings

To access the body mount bushings, you'll need to raise the vehicle safely. Utilize a jack and jack stands to lift the car high enough to crawl underneath and locate the bushings. Once the vehicle is stable, proceed with caution.

AD
How to Replace Control Arms and Bushings to Fix a Bouncy Suspension
How to Replace Control Arms and Bushings to Fix a Bouncy Suspension
How to Remove Rust From an Underbody of a Car - The Complete Guide
How to Remove Rust From an Underbody of a Car - The Complete Guide
How to replace your upper and lower control arm bushings
How to replace your upper and lower control arm bushings

Ford body mount bushings are typically found near the engine or transmission, connected to the vehicle's frame or unibody structure. Consult your vehicle's repair manual for precise locations, as they can vary depending on the make, model, and year of your Ford.

Locating and Prepping the Bushings

Using a flashlight, inspect the area to identify the bushings. They are usually made of rubber or polyurethane and may be rusted or damaged. Before attempting to remove them, clean the area around the bushings to avoid any debris falling into sensitive components.

Sunbeam Bushing Tool
Sunbeam Bushing Tool
Cure Bumpsteer: Steering You Straight
Cure Bumpsteer: Steering You Straight

To make the removal process easier, apply penetrating oil around the bushings. This helps to break down anyrust or corrosion, allowing the bushing to release its grip on the mount.

Removing the Ford Body Mount Bushings

Once prepped, use a suitable socket and ratchet to loosen and remove the bolts or nuts securing the bushing to the mount. If the bushing is particularly stubborn, you can use a bungee cord or twisted wire coat hanger to pry it loose. Hook the cord or wire around the bushing and pull gently but firmly to break the seal between the bushing and the mount.

AD

In some cases, you may need to use a hammer and a flathead screwdriver to tap the bushing out. Working from the side, carefully tap the screwdriver's head against the bushing to gradually push it out of the mount. Be sure to wear safety glasses during this process.

Installing New Body Mount Bushings

With the old bushings removed, clean the mounting surface to ensure a proper fit for the new bushings. If necessary, use a grinding tool or emery cloth to smooth any rough edges or surfaces that may interfere with the new bushing's seal.

Before installing the new bushings, apply a small amount of liquid soap or dish detergent to their outer surfaces. This helps to lubricate the bushings and makes installation easier. Manufacturers often provide specific installation instructions, so consult those if available.

AD

Inserting New Bushings

Position the new bushing over the mount and use your fingers to gently press it into place. To fully seat the bushing, you may need to use a piece of wood or a mallet to tap it gently into position. Ensure that the bushing is fully seated and properly aligned with the mount.

Once the bushing is installed, reinstall the bolts or nuts and tighten them to the manufacturer's specified torque. Double-check that all fasteners are securely tightened and that the bushings are properly seated before lowering the vehicle.

Post-Installation Inspection

After lowering the vehicle, take it for a short test drive to ensure that the new body mount bushings have solved the noise, vibration, and harshness issues. While driving, pay close attention to the steering, handling, and overall ride comfort. Any persistent issues may indicate that additional components or a professional inspection is needed.

AD

Regularly maintaining your Ford's body mount bushings helps ensure a smoother, quieter ride and improves vehicle control. By following these steps and periodically checking the condition of your bushings, you can keep your Ford in top shape and confidently tackle your next adventure on the road.

AD