how to remove filter from whirlpool refrigerator

Easy Ways to Remove Filter from Whirlpool Refrigerator

By Richard Hernandez
AD

Have you noticed your Whirlpool refrigerator isn't performing as it once did? It might be due to a clogged filter, which can impair its cooling ability and even affect the quality of your food. Removing the filter from your Whirlpool refrigerator is not only a crucial maintenance task but also an essential one for keeping your food fresh. Here's a step-by-step guide on how to remove the filter safely and effectively.

Before we dive into the process, it's important to note that this guide is for Whirlpool refrigerators with a water dispenser or ice maker, which typically use a filter to remove impurities from the water. If your refrigerator doesn't have these features, the process may differ.

Gathering Your Tools and Finding the Filter

The first step is to gather your tools and locate the filter. You'll need a cup or a basin to catch any water, a towel or rag to absorb any spills, and a flathead screwdriver to help remove the filter housing cover.

AD
a person is holding an electric toothbrush in front of a water filter
a person is holding an electric toothbrush in front of a water filter
(VIDEO) How Do You Remove a Stuck Refrigerator Water Filter?
(VIDEO) How Do You Remove a Stuck Refrigerator Water Filter?
How To Reset Filter Light On Whirlpool Refrigerator
How To Reset Filter Light On Whirlpool Refrigerator

In most Whirlpool refrigerators, the filter is located in the upper right corner inside the refrigerator, behind the lower access panel. However, the location can vary depending on your model, so it's a good idea to consult your owner's manual if you're unsure.

Preparing Your Refrigerator

Before you begin, make sure your refrigerator is unplugged to prevent any electrical accidents. Also, turn off the ice maker and water dispenser, if applicable, to prevent water from flowing while you're working.

How To Change Ice Maker Filter On Whirlpool – Storables
How To Change Ice Maker Filter On Whirlpool – Storables
How to replace a Whirlpool Filter 1 in the Refrigerator Grille
How to replace a Whirlpool Filter 1 in the Refrigerator Grille

The next step is to prepare the refrigerator for the filter change. Place a cup or basin under the filter to catch any residual water, and have a towel or rag ready to clean up any spills.

Removing the Filter Housing Cover

The filter is enclosed in a housing that needs to be removed before you can access the filter itself. In most Whirlpool refrigerators, this cover is secured by a small screw that can be removed using a flathead screwdriver. Be careful not to strip the screw or damage the cover.

AD

Once the screw is removed, gently pull the cover off. In some models, the cover may simply twist off or slide out. If you're having trouble, don't force it - consult your owner's manual for specific instructions for your model.

Removing the Filter

Now that you've accessed the filter, it's time to remove it. Most Whirlpool refrigerator filters are twist-off, so you should be able to unscrew it by turning it counterclockwise. It might take a bit of force, but don't worry - it's designed to be tight to prevent leaks.

If you're having trouble, try using a pair of pliers to grip the filter and turn it. Again, be careful not to damage the filter or the housing. If after all your efforts the filter still doesn't budge, it might be a good idea to contact Whirlpool customer service for advice tailored to your specific model.

AD

Cleaning Up and Proper Disposal of the Old Filter

Once the filter is out, you might notice some water dripping. Don't worry, this is normal. Wipe up any excess water with your towel, and dispose of the old filter properly. Most water filters are made from biodegradable materials and can be thrown in the trash, but it's always a good idea to check with your local recycling center just in case.

After you've disposed of the old filter, it's time to install the new one. Make sure to purchase a filter that's compatible with your Whirlpool refrigerator model. You can usually find this information in your owner's manual or on the Whirlpool website.

Installing the New Filter

Installing the new filter is as simple as reversing the removal process. First, ensure the new filter is completely dry - this is important to prevent leaks and ensure proper operation.

AD

Then, align the filter with the housing and turn it clockwise to tighten it. You should feel some resistance as you turn it, but it shouldn't be overly difficult. Once the filter is securely in place, replace the cover and tighten the screw.

Your refrigerator is now ready for use with a fresh, clean filter that will help keep your food and drinks tasting their best. Regular filter changes are crucial for maintaining your refrigerator's performance, so make sure to set a reminder to replace your filter every six months, or as recommended by your owner's manual.

AD