how to remove fender

How to Remove Fender in 5 Easy Steps

By John Lewis
AD

Are you wondering how to remove a fender from your vehicle? Whether you're planning to replace it, repaint it, or simply need to remove it for any other reason, this guide will walk you through the process step by step.

Before we dive into the process, it's important to note that removing a fender can potentially cause damage if not done carefully. It's also crucial to have the right tools. You'll need a ratchet and a set of sockets, a flathead screwdriver, pliers, a pry bar, and a hammer. You might also need a torque wrench, depending on your vehicle.

Preparation

Before you start, make sure you're working in a safe, well-lit area. It's also a good idea to clean the area around the fender to make the job easier and less messy.

AD
How Do You Remove the 2021 Ford Bronco’s Fenders?
How Do You Remove the 2021 Ford Bronco’s Fenders?
How to remove front wing fender VW Golf 4 Mk4 Jetta Bora, Passat B5 in 7 steps
How to remove front wing fender VW Golf 4 Mk4 Jetta Bora, Passat B5 in 7 steps
Removing the fenders on 79 without removing front clip
Removing the fenders on 79 without removing front clip

You'll also want to gather all the tools you'll need. It's better to have everything at hand than to have to stop mid-job to fetch a tool you've forgotten.

Gather your tools

  • Ratchet and socket set
  • Flathead screwdriver
  • Pliers
  • Pry bar
  • Hammer
  • Torque wrench (if needed)

Prepare the work area

Choose a safe, well-lit area to work in. Clear the area around the fender of any obstacles. You might also want to lay down a drop cloth to protect the ground from any debris or paint chips.

Do-It-Yourself | Easy Step-by-Step DIY Tips
Do-It-Yourself | Easy Step-by-Step DIY Tips
How To Remove Inner Fender Mudguards | Car Fender Liner Removal
How To Remove Inner Fender Mudguards | Car Fender Liner Removal

Removing the Fender

Now that you're prepared, it's time to start removing the fender. The process involves removing the fender's clips and then unbolting it from the vehicle.

Start by removing any large clips or bolts that are easily accessible. Then, use a flathead screwdriver and a pry bar to gently pry the fender away from the vehicle. This will help you access the smaller clips that are holding the fender in place.

AD

Remove the bolts

The fender is held in place by bolts. Depending on your vehicle, these bolts might be easily accessible, or they might be hidden behind a plastic cover. Use your ratchet and socket set to remove these bolts.

If a bolt is corroded or difficult to remove, you can use a little bit of penetrating oil to help loosen it. If a bolt breaks off, you might need to use a bolt extractor to remove it.

Remove the clips

After the bolts are removed, you should be able to see the plastic clips that also help hold the fender in place. Use your flathead screwdriver and pry bar to gently pry these clips out of their recesses.

AD

Some of these clips might be difficult to remove because they're held in place by the fender's shape. In these cases, you might need to use a hammer to gently tap the fender and help release the clip.

Final Touches

With the bolts and clips removed, the fender should now be loose. Use your ratchet and socket set to remove the remaining bolts or screws that are holding the fender in place.

Once all the hardware is removed, you should be able to pull the fender off the vehicle. It might take a little bit of wiggling and some gentle pulling, but it should come off.

AD

Inspect the fender

Before you put the fender away or reinstall it, take a moment to inspect it. Check for any damage, such as cracks or rust. If you're planning to paint the fender, now is the time to sand and prime it.

Store the fender properly

If you're not reinstalling the fender right away, make sure to store it properly. Keep it in a cool, dry place, away from any direct sunlight or water. This will help prevent any further damage to the fender.

Removing a fender can be a tricky job, but with the right tools and a little bit of patience, it's definitely doable. Whether you're preparing to paint your fender, replace it, or simply need to remove it for any other reason, this guide will help you get the job done right.

AD