how to remove drum from washer

How to Remove a Drum from a Washer: Step-by-Step Guide

By Richard Rodriguez
AD

Ever heard that pesky drum-like sound echoing from your washing machine? It's likely your washers' drum bearings, which support the rotating spin tub, are on their way out. Removing a drum from a washer isn't as intimidating as it sounds. With a bit of know-how and the right tools, you can troubleshoot this issue and restore silence to your laundry room. Let's dive into a step-by-step guide on how to remove a drum from a washer, ensuring your machine's longevity and your sanity!

Before we begin, safety first! Unplug your washer, turn off the water supply valves, and locate the drainage hose to prevent any water mishaps. Now, let's roll up our sleeves and get started!

Gathering Your Tools and Understanding Your Washer

First things first, gather your tools. You'll need a socket wrench that corresponds to your washer's bolts, a screwdriver, a putty knife, and possibly a mallet. Understanding your washer's type – front-loading or top-loading – is crucial as the process differs slightly between the two. Most modern washers follow a similar disassembly process, but always consult your user manual for specific details.

AD
Learn How to Remove Your Washing Machine Drum in Minutes!
Learn How to Remove Your Washing Machine Drum in Minutes!
How to Naturally Clean a Top-Loading Washing Machine
How to Naturally Clean a Top-Loading Washing Machine
How to remove a drum from a top loader washing machine - step by step
How to remove a drum from a top loader washing machine - step by step

Now, let's explore the two main types of washers:

  • Front-loading washers: These washers typically have a drain pump and an agitator, which needs to beremoved before you can access the drum.
  • Top-loading washers: These usually have a center post and a direct drive motor. Remove the top panel and access the drum from the top.

Disassembling the Front-Loading Washer

Start by removing the screws at the bottom of the washer, usually hidden beneath a panel or access flap. Once exposed, use your putty knife to pry off the bottom panel. Next, locate andremove the drain pump. Now, prop open the washer's door using a screw or a stick, and move to the front of the machine. Remove the screws holding the detergent dispenser, and gently pull it out to expose the drum.

How to Clean Your Washing Machine Drum (Front and Top Loaders)
How to Clean Your Washing Machine Drum (Front and Top Loaders)
How To Remove The Drum From A Whirlpool Washing Machine - Hunker
How To Remove The Drum From A Whirlpool Washing Machine - Hunker

Now, you'll need to remove the bolts holding the drum in place. Using your socket wrench, loosen and remove these bolts. With the bolts removed, the drum should be free. However, you might still need to gently tap it with a mallet to release the linkages. Once free, carefully pull the drum out of the washer.

Disassembling the Top-Loading Washer

Begin by disconnecting the hoses and electrical connections, then remove the back panel to expose the motor and drum. Top-loading washers often have a center post. Grab a socket wrench and remove the bolts securing the post. With the post removed, you should see the drum. Locate and remove the bolts holding the drum, then carefully pull the drum out from the top of the washer.

AD

Remember, some top-loading washers have a direct drive motor. In this case, you'll need to remove the motor to access the drum.

Inspecting and Replacing the Drum

With the drum removed, inspect it for any signs of wear or damage. If you locate the culprit – usually a corrosion or breakage in the bearing – it's time to order a replacement. Be sure to choose a drum that matches your washer's make and model.

Once you've got your new drum, line up the holes and bolts, then carefully slide it back into the washer. Reassemble your washer in reverse order, making sure to reconnect all hoses, electrical wires, and panels securely.

AD

Reassembling the Front-Loading Washer

Slide the drum back into place from the front, replace the bolts, and tighten them securely with your socket wrench. Reattach the drain pump, and reconnect the drain hose. Lastly, replace the bottom panel and secure it with screws.

Reassembling the Top-Loading Washer

Slide the drum back into place from the top, line up the center post, and reattach it using bolts. If your washer has a direct drive motor, reattach it now. Ensure all wires and hoses are reconnected correctly before replacing the back panel. Finally, replace the top panel and reattach the control panel and lid.

Plug your washer back in, turn on the water supply valves, and test it for that dreaded drum sound. With any luck, it's gone, and your washing machine is running smoothly again. Regular maintenance and prompt troubleshooting can help prevent such inconveniences and ensure your washer serves you well for years to come. Happy washing!

AD
AD