How to Remove a Downspout
Tired of rainwater causing erosion or flooding around your home's foundation? The answer might lie in removing your downspout and installing an underground drainage system. This guide will walk you through the process, ensuring your home remains safe and dry.
Removing a downspout and installing an underground drainage system might sound daunting, but with the right tools and knowledge, it's well within the reach of a DIY enthusiast. Let's delve into the step-by-step process.
Gathering Tools and Materials
Before you begin, ensure you have all the necessary tools and materials. These include a shovel, a saw, a drill, bentonite clay, and a heavy-duty plastic pipe.
Safety is paramount. Make sure to wear work gloves, safety glasses, and sturdy shoes. If you're working near power lines or gas lines, contact your local utility companies first.
Types of Downspouts to Consider
Downspouts come in two types: elbow and bracket. Elbow downspouts are simpler to install but can be prone to rust and solar damage. Bracket downspouts, while more complex to install, are more durable and can last for decades.
When choosing a replacement, consider opting for seamless aluminum downspouts. They are less likely to clog, can withstand extreme temperatures, and are virtually maintenance-free.
Understanding Your Drainage Needs
Before proceeding, understand your home's drainage needs. A simple visual inspection can reveal how water flows away from your home. Note any areas where water tends to pool or flow back towards your house.
Your underground drainage system should mimic these natural paths to ensure efficient water flow away from your home's foundation.
Preparation and Planning
Before you start digging, contact your local utility companies to ensure you aren't about to dig into any buried lines. Also, check local building codes and obtain any necessary permits.
Lay out where you'll dig using stakes and string. This will serve as your guide as you dig and will help you maintain a straight path for your new drainage system.
Digging the Trench
Using a shovel, dig the trench for your new drainage system. The depth should be at least ten inches, and the width should be wide enough to accommodate your drainage pipe, typically around 12 inches.
Ensure your trench slopes slightly away from your home. This slope should be about one inch for every eight feet to facilitate water flow.
Preparing the Drainage Pipe
Measure and cut the drainage pipe to fit your trench. Remember to leave some extra pipe on either end to accommodate any sediment buildup or slight shifts in the ground.
Spray your pipe liberally with insect repellent to deter vermin from nesting inside. Also, apply a thin layer of bentonite clay around the pipe to create a watertight seal.
Installation and Finishing Touches
Carefully place your prepared pipe into the trench. Ensure it's properly aligned with the slope and fits snugly.
If you're using a downspout extension, attach it now. Ensure it's secure and aligns properly with your new drainage pipe.
Testing and Maintenance
Pour a few gallons of water into your new system to test it. The water should flow swiftly and predictably away from your home.
Regularly inspect and maintain your system. Remove leaves and other debris that can clog the pipe. Consider installing a wire mesh guard over your downspout to prevent blockages.
In the long run, removing your downspout and installing an underground drainage system can prevent costly water damage and protect your home's foundation. It's a task well worth the effort and time invested.