how to remove door knobs without screws

How to Remove Door Knobs without Screws

By Laura Jackson
AD

Imagine this: You've decided to give your home a fresh new look, but those old door knobs are holding you back. The problem? They're secured not with screws, but with some sort of hidden mechanism. Fear not, for this guide is here to help. We'll explore two common methods to remove door knobs without screws, ensuring your home improvement project stays on track.

Before we dive in, let's address a crucial safety precaution. Always ensure that the door is locked from your side before starting. This prevents the door from swinging open unexpectedly, which could potentially cause injury. Now, let's get started.

Method 1: The Set Screw Approach

Many door knobs, especially those that are antique or vintage, might use a set screw to secure them. This method is commonly found in older hardware. Here's how to tackle it:

AD
How to Remove a Doorknob With Hidden Screws | Angi
How to Remove a Doorknob With Hidden Screws | Angi
How To Remove A Door Knob without Visible Screws
How To Remove A Door Knob without Visible Screws
How to Remove and Replace a Weslock Doorknob
How to Remove and Replace a Weslock Doorknob

Locating the Set Screw

First, you need to find the set screw. It's typically located on the side of the knob, often hidden behind a small cover or cap. Use a small flathead screwdriver to pry off the cover, revealing the set screw underneath.

Be gentle while doing this to avoid damaging the door knob. If the cover is stuck, you can use a bit of gentle lubricant like WD-40 or graphite powder to help loosen it.

an image of a door handle with the words depressinging detent on it
an image of a door handle with the words depressinging detent on it
How to Remove a Door Knob with No Screws | Easy DIY Installation
How to Remove a Door Knob with No Screws | Easy DIY Installation

Removing the Set Screw

Once the set screw is exposed, use an appropriate tool to remove it. For an Allen (hex) set screw, use an Allen wrench. For a Phillips or flathead set screw, use a screwdriver that matches the screw head. Turn the tool clockwise to tighten the screw, then counterclockwise to loosen and remove it.

If the set screw is stripped or damaged, you might need to use a power tool with an attachment designed for removing stubborn screws. Always be cautious when using power tools to avoid damaging the door knob or causing injury.

AD

Method 2: The Mortise Cylinder Approach

Some door knobs, particularly those in bathrooms and closets, may use a mortise cylinder mechanism. This method is more common in lever-style handles. Here's how to proceed:

Identifying the Knob's Type

First, determine if your door knob uses a mortise cylinder mechanism. Look for a locking mechanism similar to a bathroom or closet door knob. If you can't tell, it's best to verify before proceeding to avoid damaging your hardware with the wrong method.

You can usually figure this out by looking for a small hole in the side of the knob, often covered with a rubber plug. If you see this, your knob likely uses a mortise cylinder mechanism.

AD

Removing the Knob

Using a flathead screwdriver or a coin, press into the small hole on the side of the knob. You should feel a tether or rod inside. Press and hold this while gently pulling the knob away from the door. If done correctly, the knob should pop off.

If it doesn't budge, try lubing the area around the hole with a bit of graphite powder or WD-40. This can help free up any stuck parts. Be patient and gentle to avoid breaking anything.

Embarking on a home improvement project can be both exciting and daunting. By familiarizing yourself with these methods, you're ready to tackle those door knobs without screws standing in your way.

AD
AD