how to remove door handles from samsung refrigerator

How to Remove Door Handles from Samsung Refrigerator

By Daniel Thompson
AD

If you're dealing with a temperamental Samsung refrigerator door, it might be time to consider removing the handle for repairs, replacement, or a fresh new look. Here's a comprehensive guide on how to remove door handles from your Samsung refrigerator, ensuring you'll be back to chilled cushioned comfort in no time.

Before you begin, double-check your refrigerator model and that the following steps apply to your specific unit. Samsung's diversity in design means there may be slight variations in the removal process. This guide focuses on Samsung's popular French Door and Bottom Freezer models.

Preparation and Safety Measures

Your safety should always be your top priority. Before beginning, unplug your refrigerator to avoid any electrical hazards. Additionally, gather your tools, which may include: a screwdriver, a socket wrench, and perhaps a Mallet for gently tapping pieces into place.

AD
How to Remove Samsung Refrigerator Door Handles
How to Remove Samsung Refrigerator Door Handles
an open refrigerator with the door wide open and red line showing where it is located
an open refrigerator with the door wide open and red line showing where it is located
How To Replace Refrigerator Handles - Hunker
How To Replace Refrigerator Handles - Hunker

Once your refrigerator is unplugged, allow it to defrost and dry for a few hours. This is a crucial step to prevent water damage from any melting frost.

Unscrewing the Handle

First, locate the screws on the door handle. These are usually visible at the bottom of the handle. Using either your screwdriver or socket wrench, turn counterclockwise to remove the screws. If the screws are particularly stubborn, you can gently use a mallet to tap the handle, loosening it slightly.

Remove Or Replace The Door On A Samsung Fridge
Remove Or Replace The Door On A Samsung Fridge
How To Fix A Broken Samsung Refrigerator Freezer Door Handle
How To Fix A Broken Samsung Refrigerator Freezer Door Handle

If your refrigerator has a safety lock, be sure to disengage it before attempting to remove the handle. This can usually be done by pushing the handle inward while pressing the lock release button.}>

Carefully Removing the Handle

With the screws removed, carefully pull the handle towards you. It may take some gentle wiggling, as the handle should be slightly offset to avoid interference with the door seal. Once it's free, set it aside, ensuring you keep the screws safe.

AD

Initially, the handle might seem firmly attached, but with a little patience, you should be able to remove it without causing any damage.

Removing the Handle Support Brackets

With the handle removed, you'll notice two small brackets supporting it. These brackets are often secured with screws or nuts and bolts.

The screws may be Phillips or flathead, while the nuts and bolts could require an adjustable wrench. Once again, counterclockwise is the key, and if they're resistant, a gentle tap with a mallet can help loosen them.

AD

Screws or Bolts

If the brackets are secured with screws, using your screwdriver, carefully unscrew them one at a time. If a socket wrench is required, select the appropriate size and proceed with the same counterclockwise motion.

To avoid misplacing any small hardware, place a small container nearby to collect the screws and bolts as you remove them.

Removing the Brackets

With the screws or bolts removed, lift the brackets straight up and pull them away from the door. Be cautious; these brackets might be plastic, and you don't want them to break.

AD

Set the brackets aside with their corresponding screws and bolts. These will come in handy if you decide to reinstall the original handle or fit a new one.

Inspecting and Repairing

Now that your refrigerator door is bare, take the opportunity to inspect the area for any signs of damage, such as corrosion or wear and tear. If any issues are found, this would be the ideal time to address them before reinstalling the handle.

For example, if the brackets have any missing screws or hundreds of micro-scratches, replacing them with new ones could prevent further damage or wear.

Cleaning the Area

Before reinstalling the handle, use a mild cleaning agent to wipe the area around the brackets. This will remove any grease or dust, helping to prevent corrosion and promoting better fitting of the handle upon reinstallation.

A mixture of warm water and mild soap, or an all-purpose cleaner, should suffice. Use a soft cloth or sponge to gently scrub the surface, then dry it thoroughly.

Reinstalling the Handle

If you've finished your repairs, it's time to reinstall the handle. Start by reattaching the brackets, ensuring they're firmly secured but not over-tightened.

Once the brackets are secure, place the handle onto the brackets and gently press it into place. If you're installing a new handle, ensure it's the correct size and shape for your refrigerator door.

Use the original screws (or replacement ones if necessary) to secure the handle, tighten carefully in a clockwise direction, until it's firmly attached but not overly tightened.

Confirmation that your handle is correctly fitted will be the door smoothly opening and closing as intended, and the handle staying securely in place.

Lastly, plug your refrigerator back in and after a few minutes, it should be back to its chilling duties, ready for another round of keeping your groceries fresh and cold.

AD