Easy Door Handle Removal: Step-By-Step Guide
Are you tired of a broken or faulty door handle causing inconvenience? Don't let it hold you back; learn how to remove a door handle step-by-step, in a safe and efficient manner. By the end, you will have not just replaced the old, but also gained a new skill. Let's dive in!
Removing a door handle might seem daunting at first, but with the right guides, anyone can do it. Before we proceed, ensure you have all the necessary tools and a safe workspace to avoid any accidents.
Assessing Your Door Handle Type
Before you start, identify the type of door handle you have. Handles can be lever-style or knob-style. The procedure for removal differs slightly based on the type. Let's look into each.
1. **Lever-Style Handles** (also known as passage set): These are common in home interiors and often have a matching lever on both sides of the door. The handle, latch, and striker plate are interconnected.
Gathering Your Tools
For this process, you will need a screwdriver (usually a Phillips or flathead), a drill with the right-sized bit (if replacing with a new handle), and a hammer (for removal). Having safety glasses and a cloth to clean debris is also a good practice.
Once you have confirmed the type and gathered your tools, let's proceed with the removal.
Removing the Handle
For lever-style handles, start by unscrewing the rose or decorative cover on the door's edge. This exposes the screws holding the handle in place. Unscrew the latch using the appropriate screwdriver. You might need to use a hammer to gently tap the latch out if it's stuck.
On the other side, remove the strike plate by unscrewing it from the door frame. You might need to take the handle-off in pieces, depending on its design. If so, repeat the process on the other side to completely remove the handle.
Removing a Knob-Style Handle
Knob-style handles are simpler to remove, but the process might differ based on whether the handle is Foley-style (two screws) or bored-through (one screw). Let's break it down.
1. **Foley-Style Handles**: Unscrew the rose or screw cover on both sides of the door to expose the screws. Use a flathead screwdriver to back out the set screw on one side. Remove the handle on that side, then repeat the process on the other side.
Removing the Screw Cover/ Rose
The process differs slightly for bored-through handles. After exposing the screws, insert an Allen wrench or an appropriately-sized hex key into the screw hole and turn counterclockwise to back out the set screw. Remove the handle and repeat the process on the other side.
If the screws are stripped or the handle is damaged, you might need to drill out the screws and replace the handle entirely.
Removing a door handle might seem minor, but it's a significant improvement that enhances your home's functionality. Go ahead, try it out, and enjoy your newfound DIY success. Who knows, you might just take on bigger projects next time!