how to remove dishwasher spray arm whirlpool

Easy Fix: Remove Spray Arm on Whirlpool Dishwasher

By David Harris
AD

Experiencing a spray arm that's not rotating in your Whirlpool dishwasher? Or maybe it's making strange noises and causing your dishes to come out less than sparkling clean? Don't worry, you're not alone. With regular use, dishwasher spray arms can get clogged, bent, or otherwise damaged. The good news is, replacing or repairing it is a straightforward DIY task. Let's guide you through how to remove and fix your Whirlpool dishwasher spray arm, step by step.

Before you start, it's important to note that while this guide is designed to be as helpful as possible, your specific Whirlpool dishwasher model may have unique features or steps. Always refer to your user manual for the most accurate information. Now, let's dive in!

Preparation: Tools Needed

Before you start, gather your tools. You'll need a screwdriver (usually Phillips, but check your model), a putty knife, and perhaps a towel or rag. Some models may also require a special tool for the spray arm, so double-check your user manual.

AD
How to remove a stuck sprayer arm - WHIRLPOOL Dishwasher Q&A
How to remove a stuck sprayer arm - WHIRLPOOL Dishwasher Q&A
How to Remove a Spray Arm from a Whirlpool Dishwasher
How to Remove a Spray Arm from a Whirlpool Dishwasher
Whirlpool Dishwasher Upper Spray Arm Fell Off: 3 Solutions - Miss Vickie
Whirlpool Dishwasher Upper Spray Arm Fell Off: 3 Solutions - Miss Vickie

Also, safety first! Make sure to turn off and unplug your dishwasher before you start. This is to prevent any electrical shock or accidental activation while you're working.

Removing the Spray Arm

Now that you're all set, let's start with the removal process.

Replace Whirlpool, KitchenAid, Maytag Dishwasher Middle Spray Arm – Easy DIY Guide
Replace Whirlpool, KitchenAid, Maytag Dishwasher Middle Spray Arm – Easy DIY Guide
How to Remove the Bottom Spray Arm on a Dishwasher
How to Remove the Bottom Spray Arm on a Dishwasher

Access the Spray Arm

Start by removing the racks. You'll need to pull out the bottom rack and then lift the top rack out of its slots. If you have a third rack, remove that as well.

Next, locate the cap or cover that protects the spray arm rod. Depending on your model, it might be at the center of the tub or near one of the corners. Use your putty knife to pry it up and pull it towards you to remove it.

AD

Remove the Spray Arm

Now, you should see the rod that the spray arm sits on. At the end of this rod, there's usually a small plastic tab. Press this tab down or to the side while simultaneously pulling the spray arm up and towards you. It should pop right off.

If it's not budging, don't force it. Check your user manual for any special removal techniques for your model. If it's still stuck, you might need to contact a professional or Whirlpool customer support.

Diagnosing the Problem and Fixing the Spray Arm

Now that your spray arm is off, examine it closely. Look for signs of clogging, bend, or damage. If it's just clogged, a good cleaning might do the trick. If it's bent or broken, you might need to replace it. Remember to clean the rod and the area around it as well.

AD

To clean, use a mixture of white vinegar and water (1:1), or dish soap mixed with warm water. Soak the spray arm and rod in this solution for about 15 minutes, then scrub gently with a soft-bristled brush or a toothpick for hard-to-reach spots. If it's still not working after cleaning, it might be time for a replacement.

Replacing the Spray Arm

If your spray arm is beyond cleaning and needs replacing, purchase a new one (Whirlpool part number: 9423632). The replacement process is essentially the reverse of the removal process.

First, ensure the old spray arm and any debris are completely removed from the rod. Then, align the new spray arm with the rod, ensuring the tab on the arm slides into the hole on the rod. Push and twist the arm gently until it's secure. Remember, you might need to reattach the protective cap as well.

AD

Reassembling the Dishwasher

Once your spray arm is fixed or replaced, it's time to put everything back together. Reinstall the racks, ensuring they're fully engaged in their slots. Then, replace the kickplate (if applicable), and finally, plug your dishwasher back in.

Before running a test cycle, double-check that the spray arm rotates freely. If it does, congratulations! You've just fixed your Whirlpool dishwasher's spray arm. If not, double-check your work and consider reaching out to a professional.

Remember, dishwashers are complex appliances. If at any point you feel unsure, don't hesitate to contact a professional. It's always better to be safe than sorry. Now, enjoy your clean dishes! The next time you feel like your dishes aren't getting their sparkle back, you'll know exactly what to do.

AD