how to remove diamond shield from motorhome

How to Remove Diamond Shield from Motorhome

By Jessica White
AD

Removing a diamond shield from a motorhome can seem like a daunting task, but with the right approach, it can be accomplished safely and effectively. This comprehensive guide will walk you through the process, step by step, ensuring your motorhome's glossy finish remains unscathed.

Before we dive into the process, it's essential to understand why you might need to remove a diamond shield. Diamond shields, also known as ceramic coatings, are applied to motorhomes to protect the paint from scratches, stains, and UV damage. However, over time, these coatings can become dull, or you might want to change the coating. In such cases, you'll need to remove the old shield before applying a new one.

Preparation and Understanding the Diamond Shield

Before you begin, it's crucial to prepare your motorhome and understand the diamond shield's composition. Most diamond shields are made of a organic composite, which isága essentially a polymer resin. This knowledge will guide your removal method.

AD
the front end of a car that has been smashed and is in need of repair
the front end of a car that has been smashed and is in need of repair
Removing Moldy Diamond Shield From An RV | Let's RV
Removing Moldy Diamond Shield From An RV | Let's RV
How to remove Diamond Shield
How to remove Diamond Shield

First, ensure your motorhome is parked in a cool, shaded area. Heat can make the diamond shield sticky and difficult to work with. Also, gather your tools: razor blades, isopropyl alcohol, plastic putty knife, rubbing alcohol, and gloves to protect your hands.

Identifying the Diamond Shield

While diamond shields are designed to mimic the appearance of clear coat, there are a few ways to confirm its presence. A quick test is to lightly scratch the surface with a fingernail. If you feel resistance, it's likely a diamond shield. Another test is to apply a few drops of water. If the water forms beads, it's a sign of a coating.

Removing Moldy Diamond Shield From An RV | Let's RV
Removing Moldy Diamond Shield From An RV | Let's RV
Diamond plate rock guard
Diamond plate rock guard

Once you've confirmed the presence of a diamond shield, it's time to prepare it for removal.

Pre-Treatment: Cleaning and Preparing the Surface

Clean the surface of your motorhome thoroughly using a mild detergent and warm water. This will remove any dirt, debris, or contaminants that could interfere with the removal process. Rinse the motorhome and dry it completely to ensure no moisture remains.

AD

Next, use rubbing alcohol to prep the diamond shield further. Apply it to a soft cloth and gently wipe the surface. This helps to break down the sealant and prepare it for removal.

Removing the Diamond Shield

Now that your motorhome is prepared, it's time to remove the diamond shield. Remember, the key to successful removal is to work methodically and carefully to avoid damaging the paint.

Begin at one corner of the motorhome, preferably where the shield has been damaged or is peeling. This will make your initial cuts easier and less noticeable.

AD

Scoring the Diamond Shield

Using a razor blade held at a 45-degree angle, carefully score the diamond shield. Start at one corner and cut horizontally, then vertically, creating a series of small X's. This process breaks up the shield's seal and makes it easier to remove.

Be cautious when scoring. Press too hard, and you could score the paint. Not hard enough, and the shield won't lift effectively. It's a delicate balance, so take your time.

Lifting and Removing the Diamond Shield

After scoring, use a plastic putty knife to start lifting the shield. Slide the knife under the scored shield and carefully work it up and down, lifting the shield in small sections. The scored shield should lift away in small pieces or strips.

AD

The goal is to remove the diamond shield in large sheets. If you encounter stubborn sections, apply a little light pressure with your putty knife, but be careful not to damage the paint.

Once you've removed the diamond shield, clean any residual sealant from the surface using isopropyl alcohol and a soft cloth. Rinse the area with clean water and dry thoroughly.

Congratulations, you've successfully removed the diamond shield from your motorhome! The next step is to prep the surface for a new coat, ensuring your motorhome maintains its glossy, protected finish.

AD