How to Remove Delta Shower Head Flow Restrictor
Ever found yourself cursing your shower head's inconsistent water pressure? Chances are, you're up against a flow restrictor, a common feature in modern shower heads aimed at conserving water. But what if you prefer a stronger jet? Removing the restrictor can significantly boost your shower's performance. Here's a simple, step-by-step guide on how to remove a Delta shower head flow restrictor, along with some helpful tips to ensure a smooth process.
Before we dive in, remember that removing the restrictor will increase your water consumption. It's essential to weigh the benefits against the potential impact on your water bill and the environment. Once you've made your decision, gather your tools and let's get started.
Preparation and Gathering Tools
First, ensure you have all the necessary tools for the job. You'll need a few simple items that are likely already in your toolbox or around the house:
- Adjustable wrench
- Flathead screwdriver
- Plumber's grease or silicone lubricant (optional but recommended)
- Rag or towel
It's also a good idea to turn off your main water supply before you begin, to avoid any unnecessary leaks or surprises. Once you've gathered your tools and turned off the water, let's move on to removing the shower head.
Removing the Shower Head
Most shower heads can be removed with just a few turns of an adjustable wrench. Here's how:
- Wrap the shower head and wrench in a rag or towel to prevent scratches.
- Grip the shower arm securely with the wrench. Be careful not to overtighten, as this could strip the hardware or break the arm.
- Turn the wrench counterclockwise to loosen the shower head. It should come off with a quarter to half turn.
If your shower head doesn't budge or you hear a grinding noise, stop immediately. You may have a high-profile shower head or one with a welded arm, which would require professional help.
Locating the Flow Restrictor
Once you've removed the shower head, you should see the flow restrictor inside. It's usually a small, plastic disc or a separate chamber within the shower head's assembly. In Delta shower heads, you'll typically find a press-fit restrictor that snaps into place.
If your shower head has a removeable faceplate, you may need to take that off first. If you're unsure, consult your shower head's user manual or look up a model-specific guide online. Once you've located the restrictor, it's time to remove it.
Removing the Flow Restrictor
Now that you have located the flow restrictor, let's discuss how to remove it. The process will depend on whether your restrictor is a disc, a separate chamber, or a press-fit piece like those found in Delta shower heads.
Removing a Disc or Chamber Flow Restrictor
For removable flow restrictors, you can usually pop them out with a flathead screwdriver:
- Insert the tip of the flathead screwdriver into the restrictor's indentation or edge.
- Gently pry the restrictor out. If it's stuck, apply a little pressure, but be careful not to bend or break the restrictor, as this could lead to leaks or a clogged shower head.
If your restrictor is particularly stubborn, you may need to use a holesaw or a specialized tool designed for the task. Before you apply too much force, consider reaching out to a local plumber or Delta customer support for advice.
Removing a Press-Fit Flow Restrictor
Press-fit restrictors are secured with friction, making them a bit more challenging to remove. Here's how to tackle this type:
- Use a flathead screwdriver to gently pry the restrictor out, as you would with a removable restrictor. However, you'll likely need to apply more force.
- If the restrictor doesn't budge, you may need to constrict the fitting around it. Wrap your screwdriver in a piece of cloth or tape, then apply gentle pressure on the restrictor while holding the fitting with your other hand. This should create enough friction to remove the restrictor.
If you're still having trouble, consider using a mixture of water and dish soap to lubricate the restrictor, or apply some silicone lubricant to the fitting. These methods can help reduce friction and make the restrictor easier to remove.
Congratulations! You've successfully removed your Delta shower head flow restrictor. Before reinstalling the shower head, apply some plumber's grease or silicone lubricant to the threads to ensure a secure fit and easy removal in the future. Then, carefully replace the shower head, hand-tightening it as much as possible before using the wrench to secure it the rest of the way. Remember, lefty loosey, righty tighty.
Now that you've improved your shower's performance, sit back and enjoy the fruits of your labor. But remember, with great water flow comes great responsibility. Be mindful of your water consumption and continue to practice water-saving habits in other areas of your life. Happy showering!