how to remove cranks

Step-by-Step Guide: How to Remove Cranks

By Thomas Clark
AD

Got a squeaky or wobbly bike that needs some TLC? The culprit might just be your cranks. Don't worry, replacing worn-out or noisy bike cranks isn't as daunting as it sounds. With the right tools and a little patience, you can learn how to remove cranks and get your bike back on track. Let's dive in and make your two-wheeled friend as good as new.

Before we begin, ensure you have all the necessary tools at hand: a hex key ( Allen key), a pedal wrench, and possibly a crank-puller tool. Now, let's get started with our step-by-step guide on how to remove bike cranks.

Preparation and Initial Steps

First things first, make sure your bike is clean and free of grease and grime. This will make the process easier and prevent any potential frustrations. Next, ensure your bike is securely clamped in a work stand or held securely between two objects. Safety first, always!

AD
Remove Cranks Without A Crank Puller
Remove Cranks Without A Crank Puller
How to Remove Bike Crank without Puller
How to Remove Bike Crank without Puller
How To Remove/Install Crank Arms On A Bike
How To Remove/Install Crank Arms On A Bike

Before removing the cranks, it's crucial to identify which type of pedal your bike uses. The two main types are square taper and splined (ISIS-drive). This will help you determine the specific tools you'll need. For this guide, we'll focus on square taper pedals, as they are the most common.

Loosen the Pedal

Using your pedal wrench, loosen the pedal on the side you'll be starting from. Turn the pedal counterclockwise until it's loose enough to remove by hand. Unfortunately, this is where the 'fun' begins, as you might find it stuck due to rust or tightness. Be patient and apply steady force.

quick way to remove the motorcycle crank #mechanic #tecnical #ideas #remove #tipsandtricks
quick way to remove the motorcycle crank #mechanic #tecnical #ideas #remove #tipsandtricks
How To Remove And Install Bicycle Cranks
How To Remove And Install Bicycle Cranks

TIP: If the pedal is extremely tight, try applying some lubricant around the pedal threads, let it sit for a few minutes, then repeat the loosening process.

Remove the Pedal

Once the pedal is loose,-unscrew it completely by hand. If you've managed to loosen it with your pedal wrench, this part should be easy. You might want to keep track of which pedal goes where, as they can be slightly different.

AD

Now that the pedal is off, you'll see the crank arm's square taper collar. This is the part that holds the crank onto the spindle. Your goal is to incrementally move this collar over the spindle's threads until it's completely off.

Removing the Crank Arm

The next step is to remove the crank arm itself. This is where a crank-puller tool comes in handy, but don't worry if you don't have one. A large adjustable wrench or a chisel and hammer can work as well.

The idea is to slowly and carefully pull the crank arm off the spindle. Start by placing the crank-puller tool (or makeshift tool) onto the crank arm's inner splines. Gently apply force and work your way around the arm, bit by bit.

AD

Using a Crank-puller Tool

If you're using a crank-puller tool, follow these steps:

  • Slot the tool onto the crank arm's inner splines.
  • Tighten the tool gradually, applying even pressure.
  • Slowly pull the crank arm towards you while holding the spindle with a wrench if necessary.

If the crank arm refuses to budge, you might need to use a little more force. However, be cautious not to damage the spindle or the crank arm. Patience is key here!

Using a Large Adjustable Wrench or Chisel and Hammer

If you're making do with an adjustable wrench, follow these steps:

AD
  • Open the wrench's jaws and place them around the crank arm.
  • Tighten the wrench gradually while applying even pressure.
  • Gently pull the crank arm towards you.

For a chisel and hammer method, carefully place the chisel onto the crank arm's inner splines. Tap gently with the hammer, working your way around the arm. Again, be patient and cautious to avoid damaging anything.

With all cranks removed, your bike is now ready for new cranks or possibly a simple crank arm replacement. Don't forget to inspect the spindle and bottom bracket for any wear or damage while you're at it.

Deep Clean and Inspection

Take this opportunity to deep clean the bottom bracket area. Use a strong degreaser and brushes to remove any built-up grime. Inspect the bottom bracket shell for signs of wear or damage. If everything looks good, you're ready for the next step!

Remember, there's no one-size-fits-all when it comes to bike maintenance. Always consult your bike's manual for specific guidelines. Now that you know how to remove cranks, the next step is to install your new ones and get back on the road!

Whether you're replacing worn-out cranks or trying out new ones, this guide has you covered. So, get out there and enjoy the ride!

AD