how to remove craftsman tool box drawers

How to Remove Craftsman Tool Box Drawers

By Anthony Walker
AD

Ever found yourself in a situation where your beloved Craftsman tool box drawers have seen better days? Perhaps they're stuck, won't slide in or out, or maybe they've simply outgrown their purpose. Removing Craftsman tool box drawers can be a breeze if you follow the right steps. Let's dive into a detailed guide on how to remove these drawers safely and efficiently.

Before you start, ensure you have the necessary tools at hand. You'll need a screwdriver (Philips or flathead, depending on your tool box model), a hammer, a pry bar, and safety glasses for protection. Now, let's get started on your tool box drawer removal journey.

Understanding Your Tool Box

Craftsman tool boxes come in various designs, but most follow a standard drawer removal process. Familiarize yourself with your tool box's layout and the drawer slides mechanism. This will help you understand where to start and what to expect during the process.

AD
How to take the drawers out of a Craftsman toolbox
How to take the drawers out of a Craftsman toolbox
How To Remove Drawers Of A Craftsman Tool Box – Storables
How To Remove Drawers Of A Craftsman Tool Box – Storables
How To Remove Drawers From A Craftsman Tool Chest - Hunker
How To Remove Drawers From A Craftsman Tool Chest - Hunker

Most Craftsman tool boxes use side-mount or undermount drawer slides. Side-mount slides are attached to the sides of the drawer and box, while undermount slides are attached to the bottom. Identifying these slides will help you determine the best way to remove your drawers.

Preparation and Safety

Preparation

Craftsman Tool Box Drawer Repair.
Craftsman Tool Box Drawer Repair.
How To Remove The Drawers From Your Craftsman Toolbox - SlashGear
How To Remove The Drawers From Your Craftsman Toolbox - SlashGear

Measure and mark the depth you'll need to cut into the tool box to expose the screws or bolts holding the slides in place. This step is crucial to avoid damaging the box's exterior or exposing yourself to unnecessary risks.

Also, prepare your workspace by ensuring it's well-lit, clean, and clutter-free. This will help you maintain a clear line of sight and prevent accidents while working.

AD

Safety

Wear safety glasses to protect your eyes from flying debris. If you're using a saw or drill, wear hearing protection and a dust mask. Keep children and pets away from your workspace to prevent accidents.

Lastly, ensure your tool box is stable and won't tip over while you're working on it. You can achieve this by securing it to a workbench or placing heavy objects on either side of it.

AD

Removing Craftsman Tool Box Drawer Slides

Side-Mount Slides

If your tool box employs side-mount slides, start by marking the depth you determined earlier. Using a saw or drill, cut into the tool box at the marks to expose the screws or bolts holding the slides. Unscrew or unbolt the slides from the tool box.

Use a hammer and pry bar to gently tap and pry off the slides from the sides of the drawer. You might need to repeat this process on the other side if the drawer took both sides of the slide. Once both sides are free, lift the drawer out gently.

AD

Undermount Slides

Undermount slides are typically secured by bolts from the inside of the tool box. Start by removing the screws or bolts holding the slide to the bottom of the drawer. You might need to flip your tool box upside down to access these bolts.

With the bolts removed, the slides should be flush with the bottom of the drawer. Using a hammer and pry bar, tap and pry the slides out from under the drawer. Be careful not to damage the slide itself, as you might want to reuse it for another project.

Removing the Drawer Fronts

After removing the slides, the drawer fronts should be easy to take off. They're usually held in place by small screws at the top or bottom. Remove these screws and pull the drawer fronts out.

Some drawer fronts might be stuck due to paint or age. If this is the case, use a flathead screwdriver to carefully pry them off. Be aware that you might cause some damage to the front or the tool box itself during this process.

Congratulations, you've successfully removed your Craftsman tool box drawers! This newfound space can now be repurposed into a cabinet, a shelf, or even a makeshift workbench. The possibilities are endless, and the best part is, you've earned a sense of accomplishment from a DIY project well done.

AD