how to remove corroded battery from maglite

"How to Remove Corroded Batteries from Maglite Flashlights"

By Joshua Taylor
AD

Have you found your trusty Maglite's battery has lost its shine, quite literally, due to corrosion? Removing a corroded battery from your Maglite may seem daunting, but fear not! This step-by-step guide will walk you through the process safely and effectively. Let's get started.

Before we dive into the removal process, safety first! Always make sure your Maglite is unplugged from any power source and allow it to cool down. Corrosion can cause electrical shorts and heat buildup, so it's crucial to handle this situation with care.

Gathering Your Tools

To remove a corroded battery from your Maglite, you'll need the right tools. Here's what you'll need:

AD
MagLite - Remove a Corroded Seized Stuck Battery in 5 Minutes - Maglite D-Cell
MagLite - Remove a Corroded Seized Stuck Battery in 5 Minutes - Maglite D-Cell
How to Remove Corroded Batteries from a Flashlight
How to Remove Corroded Batteries from a Flashlight
How to Remove Leaking Batteries from a Maglite
How to Remove Leaking Batteries from a Maglite
  • -media blasting tool (like a sandblaster or rust converter)
  • safety glasses
  • gloves
  • vehicular battery charger (optional, for restoring severely corroded batteries)
  • battery terminal cleaner
  • a small flathead screwdriver

The media blasting tool will help you remove corrosion, while the safety glasses and gloves ensure your well-being during the process.

Preparing Your Maglite

Begin by unscrewing the battery cap at the end of your Maglite. This cap can be tight, so be patient and use steady pressure. If it won't budge, try tapping it gently with a mallet or using a rubber hammer to loosen the rust.

How to Clean Battery Corrosion in a Flashlight
How to Clean Battery Corrosion in a Flashlight
How to get stuck battery out of Maglite
How to get stuck battery out of Maglite

Next, remove the battery using your flathead screwdriver. If the battery is stuck, carefully lever it out by inserting the screwdriver between the battery and the Maglite case.

Removing the Corrosion

Now that your battery is out, it's time to tackle the corrosion. Inspect the battery terminals and the inside of the Maglite's battery compartment. If corrosion is present, it will appear as a white, green, or blue powdery substance.

AD

Using your media blasting tool, carefully remove the corrosion from both the battery and the Maglite. Be mindful not to damage the battery terminals or the inside of the Maglite. If corrosion is severe, you may need to use a battery charger to restore the battery or replace it entirely.

Reassembling Your Maglite

Once the corrosion is gone, it's time to reassemble your Maglite. Before inserting the battery, use a battery terminal cleaner to ensure that the contacts are clean and free of any remaining corrosion. This will help prevent future corrosion and ensure a solid connection.

Reinsert the battery, making sure the positive and negative terminals match the polarity marks inside the battery compartment. Replace the battery cap, and securely tighten it by hand. Avoid overtightening, as this can damage the threading.

AD

Testing Your Maglite

Finally, test your Maglite to ensure it's working properly.Switch it on and check that the light functions as expected. If your Maglite still isn't working, there may be residual damage from the corrosion, and you might need to consider replacing the battery or the flashlight itself.

Now that your Maglite is corrosion-free, remember to regularly inspect and maintain your flashlight to prevent future corrosion. Keep it clean and dry, and store it in a cool, dry place when not in use.

There you have it – your Maglite, good as new! Happy lighting!

AD
AD