how to remove cord cover from wall

How to Remove Wall Cord Covers: A Step-by-Step Guide

By Daniel Wilson
AD

Ever found yourself struggling with a disheveled cord cover or a damaged one that's just hanging loose on your wall? It's time to remedy that situation. Here's a step-by-step guide on how to remove a cord cover from your wall without causing any further damage.

Before we dive into the process, it's crucial to understand that cord covers serve a vital safety purpose. They not only protect electrical cords from damage but also prevent accidents by keeping cords out of sight and preventing tripping hazards. However, they can become unsightly or damaged over time, making removal necessary. Let's explore the steps in detail.

Preparing for Cord Cover Removal

Before you start, ensure you have the right tools. You won't need many, just a few simple tools that you probably already have at home. Here's what you'll need:

AD
16+ Clever Ideas to Hide Cords on Walls
16+ Clever Ideas to Hide Cords on Walls
a woman holding a large knife in front of her face with the words easy diy paintable cord cover
a woman holding a large knife in front of her face with the words easy diy paintable cord cover
How to Hide Cords On a Wall With a Cord Cover
How to Hide Cords On a Wall With a Cord Cover
  • Utility knife
  • Screwdriver (depending on the type of fixings used)
  • Needle-nose pliers
  • Safety glasses

Safety glasses are a must to protect your eyes from any debris that may fall during the process.

Disconnecting Electrical Cords

First, ensure that all electrical cords within the cord cover are disconnected from their power sources. This safety measure prevents any electrical shocks during the removal process.

How To Remove A Cord Cover - Hunker
How To Remove A Cord Cover - Hunker
How to thread a cord through the wall
How to thread a cord through the wall

If you're unsure about any of the cords, it's always best to consult with a professional electrician. Don't risk injury or damage to your home's electrical system.

Identifying the Fixings

Next, identify what's holding the cord cover to the wall. They could be screws, nails, or adhesive strips. If the cord cover is held in place with adhesive strips, you'll have an easier job. For screws or nails, you'll need your screwdriver or a hammer and nail puller.

AD

Once you've identified the fixings, mark their location with a pencil. This will help you keep track of where to insert your tool when it's time to remove them.

Removing the Cord Cover

Now that you're all set up, it's time to start removing the cord cover. Remember, the goal is to remove the cover without damaging it, especially if you plan to reuse it or replace it with a similar one.

Cutting the Cord Cover

Begin by using your utility knife to carefully cut the cord cover along the wall. Make sure to keep the blade aligned with the wall to avoid nicking or gouging the surface. If the cord cover is secure with adhesive strips, you might not need to cut it unless you want to preserve the cover for reuse.

AD

If you're working with a particularly long cord cover, consider cutting it into smaller sections before attempting to remove it. This will make the process much easier and less labor-intensive.

Removing the Fixings

Now that the cord cover is cut (if necessary), it's time to remove the fixings. If the cover was secured with screws or nails, use your screwdriver or nail puller to carefully remove them. The pencil marks you made earlier will help guide you.

For adhesive strips, you can use needle-nose pliers to gently pull the cover away from the wall. The adhesive should peel off without too much resistance. If it's stubborn, you can use a putty knife or a flat-head screwdriver to slowly pry the cover away from the wall.

AD

Cleaning Up and Disposing of the Cord Cover

Once the cord cover is off, the next step is to clean up. Use a damp cloth to wipe down the wall and remove any residue from the adhesive strips or fixings. If there are any deep scratches or indentations in the wall, you may need to sand them down and repaint the area.

Repairing Holes

If you've removed screws or nails, you'll have to fill the holes and paint over them to restore your wall to its original condition. Use a drywall filler to fill the holes, let it dry, sand it smooth, and then touch up with paint.

Disposing of the Cord Cover

As for the cord cover, if it's still in good condition and you plan to reuse it, store it away carefully. If it's damaged or you no longer need it, dispose of it according to your local recycling guidelines.

Removing a cord cover from a wall doesn't have to be a daunting task. With the right tools and a systematic approach, it can be done quickly and efficiently. Always remember to prioritize safety, especially when dealing with electrical cords.

AD