how to remove car seat headrest

Easy Car Seat Headrest Removal: Step-by-Step Guide

By Anthony Robinson
AD

Ever found yourself needing to remove the headrest from your car seat? Whether you're looking to replace it, clean the area, or simply want to create more space, the process is fairly straightforward. This guide will walk you through the steps to remove a car seat headrest safely and efficiently, ensuring you keep your vehicle in tip-top shape.

Before we dive into the steps, remember that the process may vary slightly depending on your vehicle's make and model. The following instructions are generic and apply to most cars. Always consult your vehicle's owner's manual for specific instructions if possible.

Preparation and Safety Precautions

Before you start, ensure you have a clean, well-lit workspace. It's also a good idea to gather any necessary tools. In most cases, you'll only need your hands, but sometimes a screwdriver or a coated hook may come in handy. Always disconnect your car's negative battery cable before working on it to prevent any electrical short circuits.

AD
How to Remove and Replace a Car Seat Headrest - 2015 Subaru Crosstrek
How to Remove and Replace a Car Seat Headrest - 2015 Subaru Crosstrek
HOW TO REMOVE SEAT HEADREST
HOW TO REMOVE SEAT HEADREST
Head rest removal
Head rest removal

Working safely means taking care of your back, too. The process involves some twisting and reaching, so ensure you're comfortable and avoid any awkward positions that could strain your muscles.

Know Your Headrest Types

Car seat headrests usually come in two types: petrol-head type and key-hole type.

Easy Steps to Safely Remove Front Car Seats: A DIY Guide
Easy Steps to Safely Remove Front Car Seats: A DIY Guide
How to remove Chevrolet car models headrest
How to remove Chevrolet car models headrest

The petrol-head type is secured by a single rod that slides into a slot at the base, while the key-hole type has two rods that fit into corresponding holes. Identifying the type of headrest you have is crucial for knowing which removal method to use.

Gather Your Tools

Regardless of the headrest type, you might need the following tools:

AD
  • A screwdriver, often a Phillips or flathead, for any screws holding the headrest in place.
  • A hook or a bent coat hanger for gently pulling out the rods if they're stuck.
  • If your headrest has covers, you might need scissors to cut them off temporarily.

Removing the Headrest: Petrol-Head Type

The petrol-head type of headrest is simple to remove, but it might require a little muscle.

To remove a petrol-head type headrest, follow these steps:

Slide Up the Headrest

Start by pulling the headrest upwards to its full height. This is often indicated by your rearview mirror adjustment lever. The rod should slide upwards into a slot at the base of the seat.

AD

Some headrests may have a button or lever that needs to be depressed while you pull up. If that's the case, you'll need to pull up firmly while depressing the mechanism until the rod slides out.

Pull the Rod Out

Once the rod is fully extended, you should be able to pull it straight out of the slot. This might require some force, so be prepared. If it's stuck, use a hook or a bent coat hanger to gently pull it out.

If there's a cover on the headrest, you might need to cut it off temporarily to access the rod. If so, avoid cutting the thread or the fabric itself, and use a seam ripper if you have one. After removing the headrest, you can reattach the cover if desired.

AD

Removing the Headrest: Key-Hole Type

Key-hole type headrests can be a bit more challenging to remove, but with a bit of patience and the right technique, it's manageable.

To remove a key-hole type headrest, follow these steps:

Slide Up the Headrest.

Just like the petrol-head type, start by sliding the headrest all the way up to its maximum height.

For some key-hole types, you might need to twist or pull the headrest to the side while pulling it up. If this doesn't work, try pressing down on the seat cushion while pulling up on the headrest.

Press and Lift the Headrest.

Once the headrest is fully extended, press down firmly on the seat cushion while lifting the headrest vigorously. The rods should release from their holes with a clicking sound.

If the rods don't come out easily, try twisting the headrest slightly to the side while pulling upwards. If the rods are still stuck, use a hook or a bent coat hanger to gently pull them out.

After successfully removing the headrest, ensure the area is clean and free of any debris. If there were any covers, you can now reattach them if desired. Store the headrest, along with any screws or rods, in a safe place until you're ready to reinstall it or use it in another vehicle.

Reinstalling the Headrest

Reinstalling the headrest is simply the reverse of removing it. For petrol-head types, slide the rod into the slot at the base of the seat, then push the headrest down until it clicks into place. For key-hole types, align the rods with their corresponding holes, press the headrest down firmly, and twist or pull it to secure it.

Always test the headrest's movement to ensure it's securely fastened. A loose headrest can be a safety hazard, so if it's not secure, repeat the reinstallation process.

Now that you know how to remove and reinstall a car seat headrest, you're equipped to tackle any headrest-related tasks yourself. Whether you're cleaning, maintaining, or customizing your car, remember to always prioritize safety and follow guidelines specific to your vehicle's make and model.

AD