how to remove broken license plate screws

Fix Broken License Plate Screws: Easy DIY Steps

By Rachel Clark
AD

Ever noticed your license plate looking a bit crooked? Chances are, it's due to broken or missing screws. Don't let this minor issue escalate into a bigger problem. Here's a step-by-step guide on how to remove broken license plate screws safely and efficiently.

Before you start, make sure to gather the necessary tools and find a safe, well-lit workspace. This simple task can be tackled in your driveway or garage in just a few minutes.

Gathering Your Tools

First, ensure you have all the required materials to replace your license plate screws. You'll need new screws, a screwdriver ( preferably a Phillips #2), and a pair of pliers. Safety glasses are also recommended to protect your eyes from debris.

AD
| Rx Mechanic
| Rx Mechanic
Don't drill your bumper to attach that plate. Easy method.
Don't drill your bumper to attach that plate. Easy method.
How to remove a broken bolt in a deep hole | remove broken bolt in recessed hole
How to remove a broken bolt in a deep hole | remove broken bolt in recessed hole

It's recommended to have a few extra screws on hand, just in case. You can find these at local hardware stores or automotive parts shops. They usually come in packs of 10 or more, which should last you quite a while.

Identifying the Problem

Before you start removing screws, carefully inspect your license plate and mounting zone. Check for any visible signs of damage, such as stripped screw heads, broken screws, or missing screws. Once you've identified the issue, you're ready to proceed.

17 Cleaning Products Professional House Cleaners Always Buy
17 Cleaning Products Professional House Cleaners Always Buy
5 ways to remove a broken screw
5 ways to remove a broken screw

If the screw is broken below the surface, you might need to use a drill to create a starter hole. This will allow you to extract the remaining piece of the broken screw.

Preparing the License Plate

Remove the license plate from your vehicle, if possible. This will make the process much easier and allow you to work in a horizontal plane. If the plate is too damaged or the screws are too broken to unscrew, prepare to use a drill as mentioned in the previous step.

AD

If you're working on the vehicle itself, be sure to cover any sensitive areas with a blanket or cloth to prevent scratches. You might also want to use a masking tape to mark the outline of the license plate, ensuring you'll be precise when reattaching it.

Removing Broken Screws

Now that you've gathered your tools and prepared the license plate, it's time to remove the broken screws.

First, using your screwdriver, try to unscrew the broken piece. If the screw head is damaged or stripped, you might need to use a pair of pliers to grip the remaining piece. If the screw is too broken or stubborn, you'll need to drill a pilot hole.

AD

Trying to Unscrew the Broken Piece

Firmly grip the broken piece with your screwdriver and slowly turn it counterclockwise. Be gentle but keep a steady pressure. If the piece turns without coming out, it might be still embedded in the mounting zone. In this case, you'll need to drill a pilot hole.

If the piece breaks even further, don't worry. The next step will help you remove the entire remaining bit of the screw.

Using Pliers for Stubborn Screws

If the screw head is too damaged or stripped, you'll need to use a pair of pliers to grip the remaining piece. First, make sure the screw is well-centered in the pliers. Then, firmly grasp the screw and turn it counterclockwise. Be extremely careful not to damage the surrounding area.

AD

Again, if the screw is too stubborn, don't force it. Move on to the next step and drill a pilot hole.

Drilling a Pilot Hole

If the broken piece is too stubborn or embedded, you'll need to drill a pilot hole to remove it.

First, make sure to secure the license plate or vehicle part in place. Clamping it down will ensure the drill bit doesn't slip.

Creating the Starter Hole

Choose a drill bit that's smaller than your screw's diameter. Drill slowly and carefully, trying to center the bit over the remaining screw piece. Remember to wear safety glasses to protect your eyes from debris.

Once you've drilled through the remaining piece, you should be able to use the screwdriver or pliers to remove it completely. If the piece is still too stubborn, use a magnet or a small brush to clear out any debris from the hole.

Extracting the Remaining Pieces

Now that you've created a starter hole, you should be able to easily remove the remaining piece of the broken screw. Use your screwdriver to unscrew the piece, turning counterclockwise. If it's still too stubborn, use a pair of pliers to grip and turn the piece.

Once you've successfully removed the broken screw, you're ready to replace it with a new one.

Remember, safety should always be your top priority. If you're unsure about any part of the process, don't hesitate to consult a professional. With a bit of patience and the right tools, you can replace your license plate screws like a pro.

AD