how to remove broken caliper bolt

How to Remove Broken Caliper Bolt: Expert Steps

By William Harris
AD

Tackling a broken caliper bolt can be a challenge, but with the right steps, it's a fixable issue. In this guide, we'll walk you through the process of removing a broken caliper bolt, ensuring your safety and the longevity of your vehicle.

Before we dive into the nitty-gritty, let's understand why caliper bolts break. Often, it's due to corrosion from Exposure to water and road grime. Whatever the cause, removing a broken bolt requires patience and the right tools.

Gathering Your Tools

First, ensure you have the correct tools for the job. You'll need:

AD
How To Remove Broken Snapped Brake Caliper Bolt
How To Remove Broken Snapped Brake Caliper Bolt
Use a Drill Tool to Remove Broken Bolts
Use a Drill Tool to Remove Broken Bolts
How to Tighten a Brake Caliper Bolt in 5 Steps | YourMechanic Advice
How to Tighten a Brake Caliper Bolt in 5 Steps | YourMechanic Advice
  • Socket wrench or breaker bar
  • Socket extensions
  • Impact wrench (if possible)
  • Penetrating oil (like WD-40)
  • Needle-nose pliers
  • Hammer
  • Screw extractor drill bit (if necessary)

Having these tools at hand will make the process much smoother. Now, let's move on to the removal process.

Preparation: Accessing the Broken Bolt

Start by jacking up the vehicle and safely supporting it with jack stands. Remove the tire to gain access to the caliper. If the bolt is exposed, proceed to the next step. If it's not, you'll need to free the caliper piston first.

How to remove a broken bolt in a deep hole | remove broken bolt in recessed hole
How to remove a broken bolt in a deep hole | remove broken bolt in recessed hole
How to Remove a Shear Bolt
How to Remove a Shear Bolt

Loosen the caliper pinch bolt and slide the caliper off the rotor. It may be tight, so use some force. If the piston is stuck, apply brake cleaner and gently tap it with a screwdriver or a suitable tool. Never use excessive force to avoid damaging the piston or the caliper.

Softening the Bolt

Spray penetrating oil liberally onto the broken bolt. Allow it to soak for at least 30 minutes, or even overnight for stubborn bolts. This should help to weaken any rust or corrosion, making the bolt easier to remove.

AD

If the bolt is still not budging, drill a small hole into the middle of the bolt using a high-speed drill bit. Be cautious not to drill too deep and damage the caliper. Then, reapply penetrating oil and wait for it to soak in.

Removing the Broken Bolt

Once the bolt has been sufficiently softened, it's time for removal. If you have an impact wrench, it can make quick work of even the most stubborn bolts. If not, use a breaker bar with a socket that fits snugly over the bolt remnant.

Apply steady force, turning the wrench clockwise to break the bolt free. If the bolt spins but doesn't move, you may need to use a left-handed tapping screwdriver or a left-handed drill bit to create a threading that can be used to extract the bolt.

AD

Extracting the Bolt

Once the bolt has broken free, you can extract the remaining piece using needle-nose pliers or a screwdriver. If the bolt is deeply embedded, use a hammer to tap it out gently.

If, after all your efforts, the bolt still won't budge, it might be time to seek professional help. Some bolts are just too damaged or too deep to remove without specialized tools.

Replacing the Caliper Bolt

With the broken bolt finally removed, clean the area and install a new bolt. Use a thread locker to ensure it stays in place. Torque the new bolt to the manufacturer's specifications.

AD

Reassemble the caliper and psz, then lower your vehicle. Take it for a test drive to ensure the brakes are working properly.

Remember, safety is paramount when working on your vehicle. Always wear gloves, eye protection, and other necessary safety gear. Never rush through the process, and always take the time to understand what you're doing.

If you're unsure about any aspect of the process, consult a professional mechanic. They can provide expert guidance and ensure your vehicle is in safe hands. Happy wrenching!

AD