how to remove broken bolt from valve cover

Stuck Bolt? 7 Easy Ways to Remove Broken Bolts from Valve Covers

By Mark Hernandez
AD

Broken bolts in valve covers can cause a world of trouble for your vehicle. They not only leak oil but also lead to engine misfires and reduced performance. If you find yourself in such a situation, don't worry. With the right tools and techniques, you can remove that broken bolt and get your engine purring like new again.

Before you dive into the task, ensure you have all the necessary tools and safety gear. You'll need a valve grinder, a tap and die set, a drill with a drill bit slightly smaller than the bolt, graphite powder, and, of course, safety glasses and gloves.

Preparing to Remove the Broken Bolt

The first step is to access the broken bolt. This usually involves removing parts like the spark plug, valve cover, and associated gaskets. Make sure you keep track of these parts to reinstall them correctly.

AD
How To Remove A Broken Bolt (With And Without Drilling) - SlashGear
How To Remove A Broken Bolt (With And Without Drilling) - SlashGear
How to remove a broken bolt in a deep hole | remove broken bolt in recessed hole
How to remove a broken bolt in a deep hole | remove broken bolt in recessed hole
Rusty Car Engine Repair, Rusty Car Engine Issues, Rusty Engine Repair, Engine Block Repair Process, Engine Bearing Failure, Rusty Car Engine Component, Engine Block With Oil Leak, Damaged Engine Block, Brake Master Cylinder Repair Kit
Rusty Car Engine Repair, Rusty Car Engine Issues, Rusty Engine Repair, Engine Block Repair Process, Engine Bearing Failure, Rusty Car Engine Component, Engine Block With Oil Leak, Damaged Engine Block, Brake Master Cylinder Repair Kit

Once you have access to the bolt, it's time to prepare it for removal. This might involve cleaning the surrounding area or applying some graphite powder to help the new bolt come out smoothly.

Drilling a Pilot Hole

If the bolt is too stiff to turn, you'll need to drill a small hole into the center of the bolt. This is called a pilot hole. Be extremely careful when drilling, as you don't want to make the hole too large or drill into the valve itself.

REMOVING ...Rounded Bolts, nuts, even brake bleeders valves.
REMOVING ...Rounded Bolts, nuts, even brake bleeders valves.
How To Remove and Replace Valves in a Cylinder Head -EricTheCarGuy
How To Remove and Replace Valves in a Cylinder Head -EricTheCarGuy

Use a drill bit slightly smaller than the bolt to create a pilot hole. Drill slowly and steadily, cooling the bit with frequent breaks to prevent it from becoming too hot. Once you've created the pilot hole, you can move on to the next step.

Tapping the Bolt

A tap is a special tool used to cut threads into the bolt. By creating new threads, you can then use a bolt extractor or an impact wrench to remove the broken bolt.

AD

Choose a tap that matches the size of your bolt. Remember that tapping can cause damage if not done carefully. Start with just a few turns of the tap, then back it out to clear any metal shavings. Continue this process until you've cut enough threads to grip the bolt.

Removing the Broken Bolt

Now that you've created new threads in the broken bolt, it's time to remove it. This can be a tough job, so be patient and don't force it.

If you're using a bolt extractor, screw it into the tapped hole until it's secure. Then, use a breaker bar or an impact wrench to turn the bolt counterclockwise. If you're using an impact wrench, make sure to secure the valve so it doesn't move around.

AD

Extracting the Bolt

If the bolt still isn't coming out, you might need to use a little more force. You can try using a bolt extractor with an impact wrench. These tools use the power of the impact wrench to extract the stubborn bolt.

Another option is to use an easy-out extractor. These tools have a reverse spiral thread that screws into the bolt, pulling it out as you turn the extractor. They're great for removing broken bolts, but they can be a bit expensive.

Cleaning Up and Reinstalling

Finally, once the broken bolt is out, it's time to clean up and reinstall the parts you removed earlier. Make sure to inspect the valve cover and other parts for any damage. If everything looks good, reinstall the parts in the reverse order you removed them.

AD

Don't forget to torque the bolts to the manufacturer's specifications. This will ensure a good seal and prevent any future leaks.

Removing a broken bolt from a valve cover can be a challenging task, but with the right tools and techniques, it's definitely doable. Remember, patience and careful work are key to preventing damage and ensuring a successful repair.

AD