how to remove boot from car

Easy Steps to Remove Your Boot & Retrieve Your Car

By Emily Martinez
AD

Ever found yourself in a bind, needing to remove your car's boot for a big road trip or to transport large items, but unsure of how to go about it? You're not alone. Removing a car boot, or trunk, can seem daunting, especially to those new to car maintenance. But fear not, with the right steps and a bit of patience, you'll be unlocking that car boot like a pro in no time.

Before we dive into the nitty-gritty, it's essential to understand that the process can vary slightly depending on the make and model of your car. So, while the following guide is tailored for a broad range of vehicles, it's always a good idea to consult your car's owner manual for the most accurate and vehicle-specific instructions.

Preparation and Safety Measures

Before starting, gather your tools. You'll typically need a flathead screwdriver, a ratchet with sockets, and possibly a trim removal tool. It's also crucial to park your car on a flat surface to prevent any issues while working.

AD
How to Remove a Car Boot in 5 minutes
How to Remove a Car Boot in 5 minutes
[884] Removing the Scammer’s Boot... FAST
[884] Removing the Scammer’s Boot... FAST
How do you remove a boot from your car?
How do you remove a boot from your car?

Safety should always be your top priority. Keep your car in 'Park' with the emergency brake engaged, and if possible, place wheel chocks in front of the front tires to prevent any unexpected movements.

Understanding Your Car's Trunk Release Mechanism

Your car's trunk release mechanism could be a simple lever and latch system, or a more complex electronic one. Taking a moment to understand how this works will make the removal process smoother.

14M views · 46K reactions | genius way to remove parking boot | Janelle & Kate
14M views · 46K reactions | genius way to remove parking boot | Janelle & Kate
Here's What Not To Do If Your Ever Find Your Car With A Parking Boot | Carscoops
Here's What Not To Do If Your Ever Find Your Car With A Parking Boot | Carscoops

For lever and latch systems, you'll usually find a handle inside your car that, when pulled, releases the trunk. Electronic systems, on the other hand, may require you to use a key fob or a button inside the car to pop the trunk. Some cars may even have a button on the outside of the car, near the trunk.

Locating the Trunk Release Cable

A crucial step in removing the boot is locating the trunk release cable. You'll typically find it running alongside the hood release cable on the driver's side of your vehicle. It's usually a long, thin wire with a thick end or a metal ring on it.

AD

To enhance visibility, try looking for the cable under the plastic covers along the bottom of your dashboard and near the pedals. If the cable is hard to spot, you may need to remove some plastic covers or use a flashlight to illuminate the area.

Removing the Trunk Lid

Now that you've located the trunk release cable, it's time to disconnect it. However, before you do, make sure to disconnect your car's negative battery cable to avoid any electrical shorts. This is a safety precaution to prevent potential damage to your vehicle's electrical system.

Once the battery is disconnected, follow the cable down until you find the locking mechanism for the trunk. This is usually a small black box with a metal arm that locks the trunk lid shut. The cable should be attached to this mechanism.

AD

Disconnecting the Trunk Release Cable

Disconnecting the cable can be a bit tricky. You might need to use a flathead screwdriver or even a trim removal tool to gently pry the end of the cable out of its housing. Be patient and careful - damaging the cable could make it difficult or impossible to reconnect later.

Once the cable is disconnected, the trunk lid should unlock and can be lifted off. If the lid is stuck or difficult to remove, you may need to disconnect a few more parts, such as the trunk's latch or the gas strut that helps lift the lid. Always consult your owner's manual for specific instructions on these parts.

Removing the Trunk from the Car

Now that the trunk lid is off, you'll likely see several tabs that secure the trunk to the car's body. These tabs usually sit in slots and provide give when the trunk is closed, allowing for a snug fit. To remove the trunk, you'll need to lift these tabs out of their slots.

AD

This can be quite challenging as the tabs are designed to fit Snugly in their slots, and you'll likely need to use a ratchet with sockets to provide the necessary force. If possible, try finding a socket that fits snugly around the edge of the tab, as this will give you the most leverage.

Reinstalling the Trunk

With the trunk removed, you'll have a spacious interior for all your cargo-carrying needs. However, when it's time to reinstall the trunk, take your time and make sure everything aligns correctly.

Start by positioning the trunk in the car and ensuring it's sitting flush with the body. Then, one at a time, start reinstalling the tabs. You may need to use a mallet or even repressurize the gas strut to ensure everything fits snugly. Once all the tabs are in place, reconnect the trunk release cable and your car's negative battery cable, and give that trunk a test lift to ensure it's working properly.

Congratulations! You've just successfully removed and reinstalled your car's boot. Now that you know how, you're ready to tackle any cargo-carrying challenge that comes your way. Just remember, always consult your owner's manual for vehicle-specific instructions, and never hesitate to seek professional help if you're unsure about any part of the process. Happy travels, and drive safely!

AD