how to remove blower motor from furnace

Step-by-Step Guide: Removing a Blower Motor from Your Furnace

By John Lopez
AD

Is your furnace blowing cold air or not working at all? The issue might be a malfunctioning blower motor. Removing and replacing this component can be a DIY task, saving you time and money. Let's walk you through the process of how to remove a blower motor from a furnace, step by step.

Before we start, ensure you follow safety protocols: turn off your furnace, unplug it from the power source, and let the furnace cool down completely. Always use proper safety gear, including work gloves, safety glasses, and a particulate mask.

Understanding the Furnace's Components

Familiarize yourself with your furnace's layout. The blower motor is typically located near the bottom, mounted on a platform or track. It's connected to the air filter and the plenum (the large metal box).

AD
How To Replace a Furnace Blower Motor and Capacitor – HowTo HVAC
How To Replace a Furnace Blower Motor and Capacitor – HowTo HVAC
Furnace Blower Motor: How Much Is It to Replace?
Furnace Blower Motor: How Much Is It to Replace?
How to replace a Blower Motor - furnace AC HVAC repair
How to replace a Blower Motor - furnace AC HVAC repair

If you're not sure about your furnace's make or model, consult the owner's manual or search for images of your furnace online for a better understanding.

Gathering Tools and Materials

You'll need the following tools and materials to remove your furnace's blower motor:

How To Replace a Furnace Blower Motor and Capacitor – HowTo HVAC
How To Replace a Furnace Blower Motor and Capacitor – HowTo HVAC
Furnace Blower Repair - loud motor and how to test a capacitor
Furnace Blower Repair - loud motor and how to test a capacitor
  • Screwdriver (flathead or Phillips, depending on your furnace)
  • Pliers
  • Wire stripper
  • New blower motor (ensure it's a direct match for your furnace model)
  • Wire nuts
  • Duct tape

Disconnecting the Blower Motor Wiring

Before removing the blower motor, disconnect the wiring:

  1. Locate the electrical connector attached to the blower motor.
  2. Using the wire stripper, strip about 1/2 inch of insulation from the wiring.
  3. Twist the exposed wires together and secure them using a wire nut.
  4. Wrap the wire nut connection with electrical tape or duct tape for added protection.

Removing the Blower Motor

Once you have disconnected the wires, you are ready to remove the blower motor:

AD

Removing the Blower Motor Housing

Furnaces come with either a top- or bottom-vent blower motor. Follow these steps based on your furnace type:

  1. Top-vent:Disconnect the ductwork connected to the motor. Then, remove the screws or bolts securing the motor housing to the bottom of the furnace cavity.
  2. Bottom-vent:Remove the access panel located at the bottom of the furnace cabinet. Then, use a screwdriver to remove the mounting screws from the motor housing.

Finally, Removing the Blower Motor

With the motor housing removed, gently pull the blower motor out from the furnace.

If the old motor is stuck, try wiggling it gently side-to-side while pulling. If that doesn't work, you may need to remove the motor mount or use a pry bar to help dislodge it.

AD

Now that you've successfully removed the blower motor, you can install the new one and reconnect the wiring. Always ensure that you replace the blower motor with an identical one to avoid any compatibility issues.

Remember, the most crucial part of any furnace repair is safety. If you feel uncertain at any point during the process, don't hesitate to contact a licensed HVAC technician. Regular maintenance and proper care will keep your furnace running smoothly and efficiently throughout the heating season.

AD