how to remove battery from ring stick up cam

How to Remove Battery from Ring Stick Up Cam

By Melissa Davis
AD

Are you looking to replace the battery in your Ring Stick Up Cam? While it's a simple process, it's essential to follow the correct steps to avoid any damage to your device. This guide will walk you through the process, from preparing your device to reinstalling it after the battery swap.

Before we start, ensure that you have a replacement battery and a Phillips #1 screwdriver at hand. Let's dive into the step-by-step guide on how to remove the battery from your Ring Stick Up Cam.

Safety First: Preparing Your Ring Stick Up Cam

Before you begin, ensure that your Ring Stick Up Cam is powered off. To do this, simply unplug the device from its power source. This step is crucial as working on a live electrical device can be dangerous.

AD
Ring Stick-Up Camera Battery review
Ring Stick-Up Camera Battery review
Clean Battery Corrosion in Remote Control
Clean Battery Corrosion in Remote Control
Ring Spotlight Cam Wired vs Battery...which one is better?
Ring Spotlight Cam Wired vs Battery...which one is better?

Next, locate the reset button on your Ring Stick Up Cam. This button is usually found on the bottom of the device, depending on your camera model. Make a mental note of its location, as you'll need to access it later.

Accessing the Battery Compartment

Now that your Ring Stick Up Cam is powered off, you can proceed to open the battery compartment. Start by unscrewing the faceplate of your device using the Phillips #1 screwdriver. Turn the screwdriver clockwise to loosen the screws, then counterclockwise to remove them completely.

Stormproof Downspout Mount for RING Stick Up Cam / Cam Pro
Stormproof Downspout Mount for RING Stick Up Cam / Cam Pro

Once the screws are removed, gently pull the faceplate off to expose the battery compartment. Be careful not to damage any of the components while doing so.

Removing the Battery

With the battery compartment now accessible, you should see the battery pack secured by a small screw. Use your screwdriver to remove this screw, turning it counterclockwise until it's completely unscrewed.

AD

After removing the screw, carefully disconnect the battery pack from the device. You may need to gently pull it out or slide it off, depending on your camera model. Once the battery pack is disconnected, your Ring Stick Up Cam's battery has been successfully removed.

Replacing the Battery and Reinstalling Your Ring Stick Up Cam

Now that the old battery is out, it's time to insert the new one. Ensure that the new battery is compatible with your Ring Stick Up Cam model. The battery should come with the appropriate connectors to fit your device.

Align the battery connector with the slot on your Ring Stick Up Cam, then firmly but gently push the battery into place until it's fully seated. The battery should fit snugly, with no visible gaps or Misalignments.

AD

Securing the Battery Pack and Faceplate

Once the new battery is securely in place, use the screw you removed earlier to secure the battery pack to the device. Turn the screw clockwise until it's tightly secured. Be careful not to overtighten, as this could damage the screw or the battery compartment.

Now that the battery is secured, replace the faceplate of your Ring Stick Up Cam. Align the faceplate with the device and push it onto the screws. Once it's securely in place, use your screwdriver to tighten the screws until they're snug. Be careful not to overtighten, as this could strip the screws or damage the faceplate.

Powering Up Your Ring Stick Up Cam

With the battery secured and the faceplate reinstalled, it's time to power up your Ring Stick Up Cam. Plug the device back into its power source. You should see the ring light on your camera flash, indicating that it's receiving power.

AD

If your camera doesn't power up, double-check that the battery is securely connected and that the faceplate is properly installed. If you're still having trouble, you may need to contact Ring's customer support for further assistance.

Congratulations! You've successfully removed and replaced the battery in your Ring Stick Up Cam. Regular battery changes will help ensure optimal performance from your device, so make sure to keep replacement batteries on hand. Happy monitoring!

AD