how to remove battery from milwaukee m12 drill

How to Remove Battery from Milwaukee M12 Drill

By Nicole Walker
AD

If you've owned a Milwaukee M12 drill for some time, you might need to change its battery. Whether it's for an upgrade or a replacement, understanding how to remove the battery from your Milwaukee M12 drill is crucial. This guide will walk you through the process in a clear, step-by-step manner.

Before we proceed, ensure your drill is unplugged and the battery is fully charged and inserted. Safety first! Remember that working with electrical components can be hazardous, so always follow safety guidelines.

Preparation: Gathering Your Tools

Before starting, you'll need a few simple tools:

AD
How to Fix a Milwaukee Battery
How to Fix a Milwaukee Battery
Repair a Milwaukee Battery Pack
Repair a Milwaukee Battery Pack
an electric drill with the words how to fix old nicad batteries and rever li - ion batteries
an electric drill with the words how to fix old nicad batteries and rever li - ion batteries
  • Your Milwaukee M12 drill
  • A new or charged battery pack
  • A Phillips #2 screwdriver (included in most Milwaukee tool sets)

Locating the Battery terminals

The first step involves identifying the battery terminals on your M12 drill. The battery pack slides into the bottom of the drill, secured by a screw. The screw is normally covered by a plastic battery release button.

You'll see two or three terminals depending on the model of your M12 drill. For 24-hole models, there are two terminals - one really large and one smaller next to it. For 12-hole models, all terminals are smaller and side by side.

Jumpstart Broken Milwaukee battery 18v
Jumpstart Broken Milwaukee battery 18v
How to Remove Battery From Cordless Drill | 4 Easy Steps (2026)
How to Remove Battery From Cordless Drill | 4 Easy Steps (2026)

Preparing to remove the battery

Once you've located the terminals, prepare your screwdriver and turn the drill to the "off" position. Make sure the trigger is not engaged to avoid any accidental operation.

Push the battery release button. This should expose a small Phillips screw underneath. Using the Phillips #2 screwdriver, carefully turn the screw counterclockwise until it pops out.

AD

Removing the Battery Pack

With the screw removed, you're ready to take out the battery pack. Milwaukee designed the M12 with a simple eject mechanism to make this task easy.

Locate the eject button, usually prominently displayed on the side of the drill near the bottom. Press this button firmly, and you should hear a clicking sound. Simultaneously, the battery pack should pop out a little, ready for you to remove it.

Pulling out the battery

After pressing the eject button, use the lever action provided by the mechanism to pull the battery out. It should slide out smoothly with minimal force. If you're having trouble, make sure you've pushed the button correctly and try again.

AD

If you need to reinsert the battery, align the battery pack with the slots on the bottom of the drill. Press it in firmly until you hear a clicking sound, indicating that it's fully engaged. Then, reinsert the Phillips screw and tighten it gently.

Testing your work

Once you've secured the new or recharged battery, power on your M12 drill and test it out. The drill should function as normal, assuring you that you've successfully removed and reinserted the battery pack.

Congratulations! You've now mastered the art of battery removal and replacement on your Milwaukee M12 drill. Keep practicing for future upgrades or replacements, and don't forget to always prioritize safety when working with electrical tools.

AD
AD