how to remove bathtub spout

How to Remove a Bathtub Spout

By Christopher Garcia
AD

Gripping a grimy bathtub spout can make bath times less enjoyable. But don't let the grime deter you; removing a bathtub spout is a simple, satisfying DIY project. With the right tools and techniques, you can transform your tub into a sparkling oasis. Let's guide you through this straightforward process.

Before you reach for your wrench, understand the type of spout you're dealing with. Waterfall faucets, single-lever mixers, and dual-handle spouts all differ slightly in their removal process. Don't worry, we'll walk you through each type.

Preparation and Tools

Gather your tools first. You'll likely need a pair of adjustable pliers, an adjustable wrench, a screwdriver, a basin wrench (a specialized tool designed for tight spaces), and perhaps some rags or towels to keep things dry. Also, place a bucket beneath the spout to catch any water that might spill.

AD
How to replace a broken tub spout. #bathtub #tubspout #diy #plumbing #plumber #handyman #bathroom
How to replace a broken tub spout. #bathtub #tubspout #diy #plumbing #plumber #handyman #bathroom
a person's hand holding onto a faucet in a sink
a person's hand holding onto a faucet in a sink
How to Replace a Bathtub Spout
How to Replace a Bathtub Spout

Next, turn off your water supply. This isn't a step you want to skip. You can find the isolation valve behind the access panel near your bathtub or under your sink. Once the water is off, turn on the faucet to release any residual pressure.

Removing a Waterfall Faucet

Waterfall faucets typically have a facet concealed behind a decorative front. Start by removing the decorative cover. Depending on the design, this could involve unscrewing it, prying it off, or unclipping it. Once you've exposed the facet, use your basin wrench to loosen and remove the spout's retaining nut.

How To: Replace a Tub Spout
How To: Replace a Tub Spout
How to Remove Bathtub Spout Made Easy
How to Remove Bathtub Spout Made Easy

Water will likely drip from the spout as you remove it. Have your bucket ready to catch any remaining water. If the spout doesn't come off easily, try using a bit of penetrating oil to lubricate the threads and make it easier to turn.

Removing a Single-Lever Mixer or Dual-Handle Spout

These spouts usually sit in place with a set screw that holds them against the tap body. Use your screwdriver to remove this screw. Then, use your basin wrench to undo the retaining nut hidden behind the spout. Again, if you're experiencing resistance, a bit of penetrating oil can help.

AD

Once the retaining nut is removed, the spout should be free to lift off. If it's still stuck in place, you might need to gently tap it with a soft mallet to break the seal. Remember, the spout is usually plastic, so don't use too much force.

Cleaning and Replacing Your Spout

With the spout removed, it's time to clean your tub's interior. Use a brush or cloth with some mild detergent to scrub away any grime. Remember, you're not just cleaning the spout; you're cleaning the entire faucet system.

If you're replacing your spout with a new one, this is the time to prepare it for installation. Check that the new spout is compatible with your tap body, and ensure it's clean and free of any packaging material. For an old spout, just ensure it's clean and free of any debris that could disrupt the seal.

AD

Installing a New or Clean Spout

If you're installing a new spout, make sure it's the correct model for your faucet. The most common type is a quarter-turn faucet, which allows water to flow quickly when turned on and off. Fit your new spout over the faucet body, ensuring the inlet holes on the spout and tap body line up.

Once the spout is in place, secure it with the retaining nut using your basin wrench. The nut should be tightened snugly, but not so much that you strip the threads. Then, reattach the decorative cover, if applicable. Finally, turn your water back on and test your new (or clean) spout.

There you have it. Removing and installing a bathtub spout isn't a complicated task, but it does require a bit of patience and the right tools. Now that your tub is shining and clean, enjoy your next bath with renewed pleasure!

AD
AD