how to remove ball bearing drawer slides

Step-by-Step Guide: How to Remove Ball Bearing Drawer Slides

By Melissa Harris
AD

Tired of your drawer stuck or making noise due to worn-out ball bearing slides? It's time to replace them. Here's a step-by-step guide on how to remove ball bearing drawer slides, ensuring your furniture stays functional and quiet.

Before you start, gather your tools. You'll need a screwdriver, a mallet, a chisel, possibly a saw (if you're replacing the entire drawer box), and new roller bearing slides. Safety first, so wear work gloves and ensure your workspace is clean.

Preparation and Accessing the Slides

Start by removing the drawers from the furniture piece. If the drawers are stuck due to the old slides, gently tap the sides of the drawer with a mallet to loosen them. Be careful not to damage the wood.

AD
How to Install Drawer Slides on a Vintage Dresser - Shades of Blue Interiors
How to Install Drawer Slides on a Vintage Dresser - Shades of Blue Interiors
How to Install Cabinet Drawers with Ball-Bearing Slides
How to Install Cabinet Drawers with Ball-Bearing Slides
Schubkasten-Upgrade: von Rollenschubführung auf Kugelvollauszug, Hettich für Heimwerker
Schubkasten-Upgrade: von Rollenschubführung auf Kugelvollauszug, Hettich für Heimwerker

Once the drawer is out, lay it on a flat surface. If the drawer is too tall or wide to easily remove the slides, you may need to lift it up by placing a small block of wood on the drawer bottom and resting the drawer sides on that.

Identifying the Slide Types

Ball bearing drawer slides come in different types - side-mount, undermount, and full-extension. Identify which type you have to purchase the correct replacement. Side-mount slides are visible from the side of the drawer, undermount slides are hidden underneath, and full-extension slides allow you to pull the drawer out completely.

How to Replace Drawer Slides | Soft-Close, Full Extension, Ball Bearing Drawer Slide
How to Replace Drawer Slides | Soft-Close, Full Extension, Ball Bearing Drawer Slide

If you're unsure, take the old slide to a hardware store to help identify the correct replacement. Some stores may also allow you to match it using a physical sample or product code.

Disengaging the Old Slides

Use your screwdriver to disconnect the slides from the cabinet or furniture piece. For undermount slides, you might need to use a chisel to create a gap between the drawer bottom and the furniture piece to reach the mounting screws.

AD

For full-extension slides, you may need to partially uninstall the outer rail from the furniture piece to access the mounting screws. If the screws are severely stripped or the wood is damaged, consider using screws with larger heads and longer lengths to secure the new slides.

Removing the Old Slides from the Drawer

After disengaging the slides from the furniture, it's time to remove them from the drawer. The process varies depending on the slide type:

Side-mount slides: Unscrew the slide from the side of the drawer. You may need to use a claw hammer or pry bar to gently lift the slide off if it's stuck due to glue or paint.

AD

Undermount slides: Carefully unscrew the slide from underneath the drawer. You may need to flip the drawer over to access the screw heads. Use a chisel if the screw heads are hidden or damaged.

Full-extension slides: Remove the entire slide assembly from the drawer side. This may involve partially disassembling the slide mechanism. Check your new slide's instructions for specific removal steps, as the method can vary by manufacturer.

Removing the Slide Mounting Hardware

After removing the old slides, you may find mounting hardware such as brackets or screws still attached to your drawer. Use your chisel and screwdrivers to carefully remove these. Be gentle to avoid damaging the drawer.

AD

If the old slide had been mounted using wood glue, you might need to use a saw to cut away the excess before sanding the area smooth. Make sure to sand the area before installing your new slides to ensure a tight fit.

Cleaning and Preparing the Drawer

Before installing the new slides, clean the mounting area to remove any dirt, debris, or leftover glue. Wipe the area with a damp cloth, then let it dry completely. Lightly sand the area if necessary to ensure a smooth surface for the new slides.

Measure and mark the mounting points for your new slides, ensuring they align with the furniture piece's slide rails. Some new slides come with their own mounting hardware, while others may reuse the old screws and brackets. Follow the instructions provided with your new slides.

With the old slides removed and the drawer prepared, you're ready to install your new roller bearing drawer slides. The process typically involves aligning the slides with the marked points and screwing them into place. Enjoy your improved drawer function and quiet operation!

AD