how to remove asus monitor stand

How to Easily Remove the ASUS Monitor Stand

By Brian Wilson
AD

Ever found yourself wanting a sleeker setup with your ASUS monitor, but the stand is getting in the way? You're not alone. Many users prefer a cleaner, more minimalist desk space. The good news is, removing the ASUS monitor stand is a straightforward process that doesn't require any special tools. Let's dive right in.

Before we proceed, ensure you have a suitable replacement for your monitor, such as a monitor mount or a VESA-compatiblestand. This guide assumes you're using an ASUS monitor with a 100x100mm VESA mount. Also, always remember to turn off and unplug your monitor before starting any disassembly.

Preparation and Disassembly

The first step is to prepare your workspace and gather any necessary tools. You'll need a screwdriver (usually Phillips), a hex key (depending on your monitor model), and possibly a bit of patience. Let's break this down further.

AD
I added Razer’s new monitor stand to my desk setup — and this underrated feature is a game changer
I added Razer’s new monitor stand to my desk setup — and this underrated feature is a game changer
How to Reset/Adjust Asus Monitor - Ready To DIY
How to Reset/Adjust Asus Monitor - Ready To DIY
25 Creative DIY Monitor Stand Ideas to Improve Your Workspace
25 Creative DIY Monitor Stand Ideas to Improve Your Workspace

Start by organizing your workspace, ensuring it's well-lit and free of any clutter that could cause accidental damage. Then, gather your tools and understand your monitor's mount system by referring to your user manual or the official ASUS website.

Gathering Required Tools

As mentioned, you'll typically need a screwdriver and, sometimes, a hex key. The specific type might vary depending on your monitor model, so consult your user manual or ASUS's support website. In most cases, though, a Phillips #2 screwdriver will suffice.

How to Remove Monitor Stand Easily
How to Remove Monitor Stand Easily
A Simple DIY Monitor Riser You Can Customize for Your Desk
A Simple DIY Monitor Riser You Can Customize for Your Desk

If your monitor stand uses hex screws, you'll need an corresponding hex key (also known as an Allen key) in addition to your screwdriver. Measure the size of the hexagonal slot to ensure you get the right fit. Common sizes include 3mm, 4mm, and 5mm.

Understanding Your Monitor's Mount

Familiarize yourself with your monitor's mount system. Most modern ASUS monitors use a 100x100mm VESA mount, which means they're compatible with aftermarket mounts and stands. However, some older models or specific series might use proprietary mounts. Check your user manual or ASUS's support website for detailed information about your specific model.

AD

Once you've gathered your tools and understood your monitor's mount, you're ready to proceed with the disassembly. Start by unplugging and turning off your monitor. Then, carefully lay it face down on a soft, protective surface to prevent scratches.

Removing the Stand

With your monitor safely laid down, it's time to remove the stand. The process involves unscrewing the stand from the monitor base. It's crucial to work carefully and gently to avoid stripping screws or damaging the monitor. Let's delve into the details.

First, locate the screws holding the stand to the monitor base. They're usually at the bottom, around the edges. Using your screwdriver or hex key, begin to loosen these screws. Turn them counterclockwise with steady pressure. If you're using an electrical screwdriver, use the lowest torque setting to avoid stripping the screws.

AD

Loosening the Screws

The screws might be tight, so be patient and don't rush. Using too much force could strip the screw heads, making them harder to remove. Continue turning the screws counterclockwise until they're completely loosened and easily removed with your fingers. Some monitors might have small plastic caps over the screws for aesthetics - if present, gently pry these off first.

Once all screws are loose, gently lift the stand from the monitor base. Be careful, as the stand might still be attached by a few threads. If you encounter any resistance, stop and double-check that all screws are fully loosened. If the stand still doesn't come off, there might be additional latches or clips holding it in place. In this case, consult your user manual or ASUS support for further guidance.

Disconnecting the VESA Plate (if applicable)

After removing the stand, you might find a metal plate remaining on the bottom of your monitor. This is likely a VESA plate, used for attaching the monitor to a VESA-compatible mount. If present, you'll need to remove it before you can proceed with attaching a new stand or mount.

AD

Locate the screws holding the VESA plate to the monitor. They're usually found along the edges of the plate. Using your screwdriver or hex key, loosen and remove these screws. Once the screws are out, the VESA plate should lift off easily. If it's still attached, consult your user manual or ASUS support for further assistance.

Reaching the Finish Line

With the stand and VESA plate (if applicable) removed, your monitor is now ready for a new stand or mount. The process of attaching a new stand or mount will vary depending on the product you choose, so make sure to follow the manufacturer's instructions for a smooth installation.

Always handle your monitor with care throughout the process. While the disassembly steps might seem straightforward, it's essential to work patiently and carefully to avoid any potential damage. Once you've finished, step back and admire your newly transformed workspace.

Enjoying your clean, clutter-free desk? We hope this guide helped you achieve the perfect setup. If you ever find yourself needing more tech tips or troubleshooting help, don't hesitate to explore our extensive range of guides to enhance your digital experience. Happy monitoring!

AD