how to remove an old moen kitchen faucet

How to Remove an Old Moen Kitchen Faucet: Step-by-Step Guide

By Richard Lopez
AD

Experienced a leaky old Moen kitchen faucet that's past its prime? It might be time for an upgrade, and thanks to this comprehensive guide, you're equipped to tackle the task yourself. Here's a step-by-step walkthrough on how to remove an old Moen kitchen faucet, ensuring a smooth and successful DIY project.

Before we dive in, make sure you have the right tools at hand. You'll need penetrating oil, a Phillips screwdriver, an adjustable wrench, a basin wrench, and possibly some Teflon tape for reassembly. Gather these essentials, and let's begin.

Preparation: Shut Off Water and Gather Tools

First, locate the shut-off valves under your sink. They're usually positioned behind the access panel, so clear the pipes to expose them. Turn the valves clockwise to stop the water flow to your faucet.

AD
How to Remove and Install a Kitchen Moen Faucet - Keeping it Simple
How to Remove and Install a Kitchen Moen Faucet - Keeping it Simple
How to Remove an Aging Moen Kitchen Faucet Without Stress
How to Remove an Aging Moen Kitchen Faucet Without Stress
How to Remove and Replace Your Kitchen Faucet
How to Remove and Replace Your Kitchen Faucet

To protect your countertop from potential drips orIMO leaks, place a cloth or towel underneath the faucet. Also, lay out a few newspapers or a dropcloth nearby to collect any hardware or water spots.

Accessing the Faucet Supply Lines

With the water shut off, disconnect the supply lines from the faucet. First, use an adjustable wrench to Unscrew the nuts securing the lines to the faucet. You might need to apply some penetrating oil to help loosen the connections if they're stuck due to age or mineral deposit buildup.

Moen Faucet Handle Removal Without Screws (Easy DIY Fix)
Moen Faucet Handle Removal Without Screws (Easy DIY Fix)
How to Fix a Leaky Faucet
How to Fix a Leaky Faucet

If the connection points are difficult to reach, grab your basin wrench. This specialized tool helps you to get a grip on those hard-to-reach nuts, allowing you to tighten or loosen them with ease.

Removing the Faucet Mounting Nuts

Next, you'll need to access and remove the mounting nuts that secure the faucet to your sink deck. Most Moen kitchen faucets feature Escutcheons, or decorative covers, hiding these nuts. To expose the nuts, you'll have to pry off these covers using a flathead screwdriver.

AD

Once exposed, use your basin wrench to remove the mounting nuts completely. Be careful not to scratch the sink surface during this process. If the nuts are stripped or otherwise damaged, you might need to replace them before installing the new faucet.

Removing the Old Moen Faucet

Now that you've disconnected the supply lines and removed the mounting nuts, it's time to lift the old Moen faucet away from the sink. Before doing so, take note of the faucet's position and assembly to ensure a smoother installation of the new fixture.

Carefully lift the faucet out of the sink, ensuring any remaining escutcheons or other loose hardware don't get misplaced. If any mineral deposits or old silicone caulk are stuck to the sink surface, take this opportunity to clean them off.

AD

Inspecting the Sink Hole

Before installing the new faucet, inspect the sink hole left behind by the old faucet. Ensure there are no signs of damage, like cracks or excessive wear. If you find any issues, they should be addressed before proceeding with the installation.

Also, check if the sink hole's dimensions match those of your new faucet. If not, you might need to create a new hole or use an adapter to accommodate your new fixture.

Preparing for Faucet Installation

Before installing the new faucet, make sure the sink mounting surface is completely dry and free from any debris. If necessary, use steel wool or a soft brush to clean the sink deck, then wipe it dry with a clean towel.

AD

If your new faucet comes with a decorative escutcheon, prepare this for installation by ensuring it fits snugly in the sink hole. It might be necessary to bend or adjust the escutcheon to achieve the perfect fit.

You've now successfully removed the old Moen kitchen faucet and readied your sink for the installation of the new one. With patience and attention to detail, you're well on your way to upgrading your kitchen space. Happy DIY-ing!

AD