how to remove an inner tie rod

How to Replace an Inner Tie Rod: A Step-by-Step Guide

By Kevin Hernandez
AD

If you're experiencing vibrations or an unusual shaking sensation while driving, your vehicle's tie rods might be at fault. The inner tie rod, specifically, connects the steering gear to the left and right steering arms, allowing your vehicle to turn smoothly. Replacing a worn-out inner tie rod is a crucial task that ensures your vehicle's safety and maneuverability. Here's a complete, step-by-step guide on how to remove an inner tie rod.

Before you dive into this project, ensure you have the required tools and knowledge. This guide assumes you're familiar with basic automotive maintenance tasks and have the necessary equipment. If you're uncertain about any steps, consult a professional mechanic.

Safety Precautions and Preparation

Safety is paramount when working on your vehicle. Follow these precautions before starting:

AD
How to Change Tie Rods (inner and outer tie rod ends)
How to Change Tie Rods (inner and outer tie rod ends)
How To Check And Replace Inner Tie-Rod (pictures & video)
How To Check And Replace Inner Tie-Rod (pictures & video)
How to Remove and Replace Inner and Outer Tie Rod Ends
How to Remove and Replace Inner and Outer Tie Rod Ends

1. Disconnect the negative battery terminal to prevent short circuits and ensure your safety during the replacement process.

2. Lift your vehicle using a suitable jack and secure it with jack stands for better stability and access to the tie rod.

Removing and Replacing Tie Rod Ends and Ball Joints
Removing and Replacing Tie Rod Ends and Ball Joints
Best Tie Rod Removal Tools for Easy Removal
Best Tie Rod Removal Tools for Easy Removal

Tools Required

The following tools are necessary to remove an inner tie rod:

  • 14mm or 17mm wrench
  • Socket wrench (14mm or 17mm)
  • Breaker bar
  • Creeper or vehicle lift
  • Wheel wedges
  • Inner tie rod removal tool (if required)

Identifying the Inner Tie Rod

Before removing the inner tie rod, locate it on your vehicle. The inner tie rod is connected to the steering gear at one end and the steering arm (or knuckle) at the other. It's usually near the center of your car, close to the steering mechanism.

AD

Once you've identified the inner tie rod, you're ready to proceed with the removal process.

Removing the Inner Tie Rod

Follow these steps to remove your vehicle's inner tie rod:

Accessing the Tie Rod End

First, use a 14mm or 17mm wrench or socket to loosen and remove the castle nut that secures the tie rod end to the steering arm. You may need a breaker bar to apply sufficient force.

AD

Once the castle nut is removed, proceed to the next step.

Detaching the Tie Rod End

To detach the tie rod end from the steering arm, you may need a specialized inner tie rod removal tool. If you don't have one, you can use a suitable pry bar or a large flathead screwdriver. Insert the tool into the gap between the tie rod end and the steering arm, then gently pry them apart.

If the tie rod end is extremely tight, you might need to use a alignment tool or apply pressure with a small hydraulic jack. Once the tie rod end is free, move on to the tie rod itself.

AD

Removing the Tie Rod from the Steering Gear

The inner tie rod is attached to the steering gear using a lock nut and a jam nut. Starting with the lock nut, use a wrench or socket to loosen and remove it. Do the same for the jam nut.

Now, grasp the tie rod and try to twist it gently. This should help break any rust or corrosion, making it easier to remove. If it's still difficult to remove, you can try using a penetrating oil to lubricate the threads and help break any rust.

Once the tie rod is loose, pull it straight out from the steering gear to completely remove it.

Inspecting the Tie Rod End and Steering Components

After removing the inner tie rod, take some time to inspect the tie rod end and other steering components. Look for signs of wear, corrosion, or damage. If you find any issues, address them promptly to maintain your vehicle's safety and reliability.

Cleaning and Preparing the Steering Components

Before installing the new inner tie rod, clean all the steered components, including the tie rod end, steering arm, and steering gear. This helps prevent debris and contaminants from being trapped in the mechanism and compromising its performance.

After cleaning, use a solvent or brake cleaner to remove any lingering oils and grease from the components. Allow them to dry completely before installing the new tie rod.

Congratulations! You've successfully removed your vehicle's inner tie rod. Replacing it with a new one follows a similar process in reverse. If you encountered any challenges or have further questions, consult a professional mechanic for assistance.

AD