How to Remove Agitator on GE Washer: Step-by-Step Guide
Are you dealing with a wonky washing machine and need to replace or repair the agitator? Don't worry, it's a manageable DIY task with the right steps and patience. Let's guide you through "how to remove agitator in a GE washer" in a simple, step-by-step process.
Before we dive in, ensure you've unplugged your washer from the power source to avoid electrical shocks. Also, gather your tools: a Philips screwdriver, pliers, and a flathead screwdriver. Let's get started!
Preparation and Accessing the Agitator
The first step is to get to the agitator. Depending on your GE washer model, you might need to remove the top panel or the control panel. Don't be intimidated; it's often easier than it looks.
Using your Philips screwdriver, carefully remove the screws holding the top panel in place. You might need to tilt the washer or use a flathead screwdriver to gently pry off the panel. Be cautious not to damage the control panel connections.
Locating the Agitator
Now that you've accessed the inner workings, locate the agitator. It's the large, vertical shaft in the middle of the washer tub. It might be difficult to see due to the water and chemicals in the tub, so you might need to drain some water.
If your washer has a lid lock, you'll need to disable it. Most GE washers have a switch on the lid switch assembly that you can flip with a flathead screwdriver. This will allow you to rotate the agitator even when the lid is closed.
Preparing the Agitator for Removal
With the agitator shaft exposed, you need to secure the washer tub to prevent it from spinning. You can do this by inserting a screwdriver into one of the tub lugs. This will keep the tub in place when you're removing the agitator gear.
Next, you need to remove the agitator gear. Use your Philips screwdriver to loosen and remove the setscrew that secures the gear to the agitator shaft. Once the setscrew is removed, the gear should slip off easily.
Removing the Agitator
With the gear removed, you can now focus on removing the agitator itself. You'll need to use a flathead screwdriver to gently pry off the agitator from the top. It might be stuck due to wear, so be patient and persistent but careful not to damage the agitator or the tub.
Once you've successfully removed the agitator, you can inspect it for damage or wear. If you're replacing it, ensure you get the correct agitator for your GE washer model.
Reinstalling the Agitator
If you're repairing the agitator, follow the reverse process to reinstall it. If you're installing a new one, ensure it's properly secured to the shaft with the setscrew and the gear is reattached.
Before you reassemble your washer, test the agitator by hand to ensure it's spinning smoothly. If it's not, check your work and ensure everything is properly aligned and secured.
Reassembling Your GE Washer
Now that the agitator is removed and either repaired or replaced, it's time to put everything back together. Reverse the disassembly steps to replace the top panel and secure it with the Philips screws.
Plug your washer back in and run a test cycle to ensure everything is working correctly. Monitor the agitator to ensure it's spinning smoothly and the washer is draining correctly.
Congratulations, you've just successfully removed and potentially replaced or repaired the agitator in your GE washer! Don't forget to dispose of the old agitator responsibly. If you encounter any issues, don't hesitate to consult a professional for help.