How to Remove a Tub Surround: Step-by-Step Guide
No bathroom renovation project is complete without addressing the old, worn-out tub surround. A new, clean, and updated appearance can transform the atmosphere of your bathroom. Removing a tub surround is a daunting task, but with the right know-how, anyone can master this DIY project. Here's a step-by-step guide to help you remove your tub surround like a pro.
Before you start, ensure you have the necessary tools and materials. You'll need safety glasses, gloves, a marker, a pry bar, a utility knife, a screwdriver, a putty knife, a spray bottle, and a trash bag. It's also a good idea to have some new building paper and cement board ready for the replacement, if you plan to install a new surround.
Preparation and Safety Measures
Prepare your workspace by clearing it of any obstacles. Spread outdrop cloths to protect your floor from debris. Safety comes first, so don your gloves and safety glasses. If there's mold or mildew present, wear a respiratory mask as well.
Turn off the water supply to the tub. Use your marker to indicate where existing screws are located so you can reinstall them later. If necessary, remove and set aside any faucet escutcheons.
Cutting the Surround
Start by cutting through the surround at the seam where the walls and floor meet. Use your utility knife to make vertical cuts around the perimeter of the tub, about 1/8" to 1/4" into the wall. Be careful not to damage the wall surface underneath.
Use your putty knife to pry the surround away from the wall, creating a gap between the wall and the surround. As you pry, move along the cut you made, peeling the surround away from the wall.
Removing the Surround
Once you've cut and pried around the entire perimeter, you're ready to start removing sections of the surround. Begin in a corner and use your pry bar to gently pull the surround away from the wall and tub. Work your way around the tub, using the pry bar and utility knife to remove any stubborn sections.
If you encounter screws or nails that resist removal, use your screwdriver to back them out. If they're too damaged to reuse, remove them and save the heads to match to new screws later. Collect all removed hardware for reuse or recycling.
Preparing for the New Surround
Once the old surround is removed, you'll need to prepare the area for the new one. Clean the surface of the walls and tub thoroughly. Use your spray bottle to mist any remaining adhesive or residue, then use a putty knife to scrape it off. Wipe the area clean with a damp cloth.
Inspect the wall and tub for any damage. Repair any holes, cracks, or other issues with a suitable patching compound. Allow the patch to dry completely before continuing.
Installing the New Surround
If replacing with a new surround, begin by installing the new building paper and cement board. Attach these along the walls, starting at the bottom and working your way up, using screws spaced every 6" to 8". Ensure the seams overlap and are firmly secured.
Once the base is secure, install the new surround according to the manufacturer's instructions. This typically involves applying mastic adhesive to the back of the surround, then pressing it firmly against the wall and tub. Use your level to ensure the surround is properly aligned and even.
Congratulations! You've successfully removed your old tub surround and prepared the area for a fresh, new look. The conclusion of this project will leave your bathroom feeling invigorated and modern. As you enjoy your renovated space, consider what other DIY upgrades you can add to further enhance your bathroom's appeal.