how to remove a trimmer head

Flush Out Your Trimmer: A Quick Guide to Removing the Head

By Rachel Jackson
AD

Struggling with a dull lawn mower trimmer head? Don't let it rain on your lawncare parade. Removing and replacing the trimmer head is a simple task that can save you from buying a new tool. Let's dive into the step-by-step process to help you get your trimmer head back in shape.

Before you start, ensure you have the right tools. You'll typically need a socket wrench, an adjustable wrench, or a trimmer head tool if one came with your mower. Safety first, so wear work gloves and protective eyewear to avoid any flying debris.

Preparation and Safety

Starting off right is crucial. Begin by disconnecting the spark plug to prevent accidental starting. Then, place your mower on a stable, flat surface for easy access to the trimmer head.

AD
String Trimmer Head | How to install new trimmer line on a traditional bump head
String Trimmer Head | How to install new trimmer line on a traditional bump head
How to BULLETPROOF A SPEEDFEED TRIMMER HEAD!! Lawncare Hack
How to BULLETPROOF A SPEEDFEED TRIMMER HEAD!! Lawncare Hack
Stihl Trimmer Head Won’t Come Off: How to Fix? - GardenProfy
Stihl Trimmer Head Won’t Come Off: How to Fix? - GardenProfy

Next, grip the trimmer head tightly with your hands. Pull up firmly to loosen it, then turn it counterclockwise. If it's stuck, use one of your tools to help you unscrew it. Once loosened, you can remove the trimmer head by hand.

Identifying Your Trimmer Head Type

Trimmer heads come in various types, so it's essential to identify yours before removal. The most common types are bump-feed, fixed-line, and semi-automatic. Bump-feed heads have a braking system, while fixed-line heads require manual line feed. Semi-automatic heads spool the line out when you bump the head on the ground.

HOW TO STRING DOUBLE-HEADED WEED EATERS #shorts
HOW TO STRING DOUBLE-HEADED WEED EATERS #shorts
Installing the Best Trimmer Head Ever | PivoTrim Replacement Head
Installing the Best Trimmer Head Ever | PivoTrim Replacement Head

Each type has its specific removal process. However, those differences mainly lie in the disassembly and reassembly steps. The initial removal process remains largely the same across all types.

Using the Right Tool for the Job

Most trimmers use 0.065" to 0.080" thin line, but some may use a 0.105" line. Check your owner's manual to ensure you're using the correct line size. Once you've measured the line, cut it to the appropriate length using a wire cutter or scissors.

AD

Next, insert the line into the trimmer head, following the manufacturer's guidelines. Make sure the line is evenly distributed around the spool. Then, carefully reassemble the trimmer head, ensuring all parts are correctly aligned and tightened.

Reassembly and Testing

After replacing the old line with the new one, it's time to reinstall the trimmer head. Ensure you follow the manufacturer's instructions as different models may have slight variations in the reassembly process.

Start by placing the spool into the trimmer head, then slot in the top cover. Twist the lock charm clockwise until it locks into place. Secure the trimmer head back onto the mower, ensuring it's tightly screwed on.

AD

Testing Your newly Installed Trimmer Head

Now that your trimmer head is back in action, it's time to test it out. Remove the safety feature, such as the blade pause switch, then reattach the spark plug. Turn on your mower and test the trimmer head at varying heights and angles.

Listen for any unusual sounds and observe the line feed. If the line is feeding correctly, your new trimmer head is ready to tackle your lawncare tasks.

There you have it. Removing and replacing a trimmer head was a breeze, wasn't it? Now you're armed with a sharp tool and the confidence to keep it that way. Happy trimming!

AD
AD