how to remove a stomp pad

Step-by-Step: How to Remove a Stomp Pad

By Joshua Garcia
AD

Ever found yourself in a predicament where your beloved skateboard's grip tape starts to peel off, or you simply want to give it a fresh look? Removing a stomp pad, also known as grip tape, might seem daunting, but with the right tools and technique, it's a straightforward process. Let's delve into the step-by-step guide on how to remove a stomp pad like a pro.

Before we dive into the procedure, it's crucial to understand that removing grip tape should be done with care. It can be tricky, especially if you're new to the task, so be prepared to put in some time and effort. Also, keep in mind that if not done correctly, you might damage your skateboard's deck. But don't let that deter you; with the following instructions, you'll be well on your way to a successful stomp pad removal.

Gather Your Tools

Before starting, ensure you have all the necessary tools for the task at hand. Having the right equipment makes the process much smoother and more efficient.

AD
TWO WAYS TO REPAIR THE PAD ON A SANDER
TWO WAYS TO REPAIR THE PAD ON A SANDER
an advertisement for stomp'n go with the foot on top of a pair of jeans
an advertisement for stomp'n go with the foot on top of a pair of jeans
a woman kneeling down on the floor with her foot up
a woman kneeling down on the floor with her foot up

Here's a list of tools you'll need:

  • Grip tape remover or a razor blade
  • Screwdriver or a pry tool
  • Steel wool or a scouring pad
  • Denatured alcohol or mineral spirits
  • Rubber gloves
  • Old rags or cloths

Preparation

Start by removing any grip tape from the trucks and wheels. Use a screwdriver or a pry tool to carefully lift the edges of the grip tape. Once you've loosened it enough, you should be able to peel it off easily.

Pads & Brushes
Pads & Brushes
Skateboard Risers Pros and Cons - To Try or Not to Try?
Skateboard Risers Pros and Cons - To Try or Not to Try?

Next, use the grip tape remover or a razor blade to cut the grip tape into strips. This will make it easier to remove and cause less damage to the skateboard deck. Be sure to wear gloves to protect your hands from any sharp edges.

Removing the Grip Tape

Now that you've prepared the skateboard, it's time to start removing the grip tape. Apply the grip tape remover or denatured alcohol to a cloth and rub it onto the grip tape. This will help to break down the adhesive and make it easier to remove.

AD

Use a steel wool or a scouring pad to scrub the grip tape gently. Be careful not to scrub too hard, as this could damage the deck. After scrubbing, let the solution sit for a few minutes before attempting to remove the grip tape.

Cleaning the Skateboard Deck

With the grip tape removed, it's time to clean the skateboard deck. This step is crucial as it prepares the deck for any further modifications or new grip tape application.

Use denatured alcohol or mineral spirits to wipe down the deck. This will remove any remaining adhesive and ensure a smooth surface. Make sure to wear gloves and work in a well-ventilated area when handling these chemicals.

AD

Deglazing the Skateboard Deck

Deglazing the skateboard deck involves sanding it lightly to remove any remaining grip tape residue and to prepare the surface for new grip tape. Use fine-grit sandpaper (220-grit or higher) and gently sand the deck in the direction of the grain.

After sanding, wipe the deck clean with a tack cloth or a damp cloth to remove any dust. Allow the deck to dry completely before applying new grip tape.

Preparing for New Grip Tape

Once the deck is clean and dry, it's ready for new grip tape. Before applying, make sure to paint or stain the deck if desired. Allow the paint or stain to dry completely before proceeding with grip tape application.

AD

With the skateboard deck prepared, you can now apply new grip tape. This involves cutting the grip tape to the desired size and shape, applying adhesive remover to the back, and carefully applying it to the deck. Use a screwdriver or a roller to smooth out any air bubbles and ensure a secure bond.

Congratulations, you've successfully removed the stomp pad from your skateboard and prepared it for new grip tape! With a bit of patience and the right techniques, you can achieve a professional-looking result. Happy skating, and remember to always wear safety gear when you hit the streets.

AD