how to remove a spark plug from a snowblower

How to Remove Spark Plug from Snowblower

By Rachel White
AD

Are you experiencing performance issues with your snowblower? It might be time to replace or clean the spark plug. Removing a spark plug from a snowblower isn't as daunting as it sounds. With the right tools and a bit of know-how, you can tackle this task in no time. Let's dive into a step-by-step guide on how to remove a spark plug from a snowblower.

Before you start, ensure your snowblower is cool and has been turned off for at least 30 minutes to prevent any potential injuries. Also, gather your tools - you'll need a spark plug socket or a deep socket wrench, an extension for leverage, and a little bit of patience.

Preparation and Safety Measures

The first step is to prep your snowblower and ensure your safety. Start by disconnecting the spark plug wire to prevent the engine from starting unexpectedly. Then, position your snowblower on a stable, flat surface where you can work safely and comfortably.

AD
How to replace a snowblower spark plug
How to replace a snowblower spark plug
How to Change the Spark Plug on a Toro Power Clear Snowblower
How to Change the Spark Plug on a Toro Power Clear Snowblower
How To Tell When It Is Time To Change Bad Lawn Mower Spark Plug
How To Tell When It Is Time To Change Bad Lawn Mower Spark Plug

Next, consider your safety. Put on safety glasses to protect your eyes from any debris or liquid that might fly out when you remove the spark plug. Also, working on an absorbent sheet or towel can help catch any oil or fuel spills.

Locating the Spark Plug

Finding the spark plug on your snowblower can be a breeze if you know what to look for. It's typically housed in an ignition coil, which is usually on the left side of the engine (when facing the snowblower). The ignition coil is the rectangular or cylindrical lump with wires running from it to the spark plug.

How to replace a snowblower fuel filter | Repair guide
How to replace a snowblower fuel filter | Repair guide
FIXING A Snowblower That Surges
FIXING A Snowblower That Surges

Once you've located the ignition coil, follow the wires to find the spark plug. It's usually held in place by a cap that you can easily remove by hand or with a screwdriver. Underneath the cap, you'll find the spark plug itself.

Removing the Spark Plug

Now that you've located the spark plug, it's time to remove it. First, place your spark plug socket or deep socket wrench over the spark plug and gently turn it counterclockwise. Use an extension if you need more leverage to loosen it.

AD

Be careful not to strip the spark plug threads or damage the cylinder head. If the spark plug is stuck, you might need to apply some penetrating oil and let it soak for a few minutes. Once it's loose, continue turning until you can remove it by hand.

Inspecting and Replacing the Spark Plug

After removing the spark plug, take a moment to inspect it. A fouled spark plug (black and sooty) indicates incomplete combustion, while a plugged spark plug (white and chalky) suggests there's an issue with the engine burning oil. If your spark plug looks worn out or damaged, it's time for a replacement.

When choosing a new spark plug, make sure it's the correct type and heat range for your snowblower. The packaging should specify the engine type it's designed for. Once you've got the right one, the installation process is simply the reverse of removal - carefully hand-tighten the new spark plug, reconnect the spark plug wire, and you're good to go.

AD

Cleaning the Spark Plug

If your spark plug isn't damaged beyond repair, you might be able to clean it and reuse it. Use a wire brush or a spark plug cleaning tool to remove any carbon buildup. Be gentle to avoid damaging the electrode tip.

After cleaning, let the spark plug dry completely before reinstalling it. If it still looks rough around the edges or damaged, it's best to replace it to avoid further issues.

There you have it - a complete guide on how to remove a spark plug from a snowblower. Keep your snowblower running smoothly with regular maintenance, and don't forget to tackle that next big snowstorm with confidence. Happy snow blowing!

AD
AD