how to remove a shower stall

How to Easily Remove a Shower Stall

By Robert Walker
AD

Do you find your shower stall noisy, outdated, or simply not to your liking? Perhaps it's time for a change. Removing a shower stall can transform your bathroom, giving you the freedom to create a new layout or install a sleek, modern shower. Let's dive into the step-by-step process of how to remove a shower stall, ensuring a safe and successful renovation.

Before we begin, remember that safety should always be your top priority. Ensure the electricity is off at your main circuit, protect your eyes with safety glasses, and wear heavy-duty gloves. Now, let's roll up our sleeves and get started!

Preparation Before Shower Stall Removal

Before you embark on this project, it's crucial to have the right tools and understand your bathroom's layout. Here's what you'll need:

AD
Tips on How to Remove Old Shower Tile
Tips on How to Remove Old Shower Tile
How To Remove a Shower Insert • Queen Bee of Honey Dos
How To Remove a Shower Insert • Queen Bee of Honey Dos
Removing Sliding Doors from a Shower - A Designer At Home
Removing Sliding Doors from a Shower - A Designer At Home
  • Crowbar or pry bar
  • Hammer
  • Safety glasses
  • Heavy-duty gloves
  • Pliers or wire cutters
  • Vacuum or broom
  • Drywall knife (optional)

Next, dry out your bathroom to minimize the risk of water damage. Turn off the main water supply and open your shower's faucets to drain the water.

Now, let's look at the key areas to consider before removing your shower stall.

the instructions for how to install a shower door
the instructions for how to install a shower door
How To Remove a Fiberglass Shower Without Destroying the Bathroom
How To Remove a Fiberglass Shower Without Destroying the Bathroom

Inspecting the Bathroom Layout

Begin by assessing the layout of your bathroom. Determine where the shower stall walls are attached to the studs and check for plumbing connections. This will help you understand the extent of the project and whether you'll need to hire a professional for assistance.

You may find that your shower stall is attached to other surfaces, such as a tile wall or the ceiling. This could make removal more complicated, so be prepared to adapt your plan accordingly.

AD

Disconnecting Utilities

Before you start removing your shower stall, ensure that you've disconnected all utilities. Turn off the electricity at your main circuit and remove any light fixtures or switches within the shower stall area. Also, disconnect any water supply lines and drain pipes connected to the stall.

Although it's possible to reconnect these utilities later, you may want to consider upgrading them during your renovation to enhance your new shower's functionality and aesthetics.

The Step-by-Step Process of Removing a Shower Stall

With your preparation complete, it's time to begin removing your shower stall. The process varies depending on whether you have a fiberglass or metal shower stall, so we'll cover both scenarios.

AD

Remember that patience is key when removing a shower stall. Rushing the process can lead to damage or injury, so take your time and be thorough.

Removing a Fiberglass Shower Stall

Fiberglass shower stalls are generally lighter and easier to remove than metal ones. Here's how to tackle this task:

  1. Use a utility knife to score any caulk or adhesive along the edges of the shower stall, both at the bottom and top. This will help loosen the stall and make removal easier.
  2. Inspect the stall's installation to determine if it's mounted on a ledger board or supported by studs. If it's mounted on a ledger board, you'll need to cut it using a reciprocating saw or utility knife before proceeding.
  3. With a crowbar or pry bar, gently pry off one corner of the shower stall. Support the stall from the opposite side to prevent it from shattering or damaging adjacent surfaces.
  4. Once you've successfully removed one corner, work your way around the remaining edges until the entire stall has been removed.

After removal, use a vacuum or broom to clean up the debris, and inspect the area for any damaged studs or water damage.

AD

Removing a Metal Shower Stall

Removing a metal shower stall requires a bit more effort due to its increased weight and strength. Here's how to approach this task:

  1. Just like with a fiberglass stall, use a utility knife to score any caulk or adhesive along the edges of the metal stall.
  2. Determine if the stall is mounted on supports or directly on the floor. If it's supported, you'll need to remove these supports before proceeding.
  3. Use a hammer and chisel to carefully chip away at the caulk or screws securing the metal stall to the surrounding surfaces. Be patient and take your time to avoid damaging the area around the stall.
  4. Once you've removed the caulk or screws, use a crowbar or pry bar to lift the metal stall off its supports or the floor. It's best to enlist the help of an assistant or two for this step due to the weight and awkwardness of the stall.

After successfully removing the metal stall, clean up the debris and inspect the area for any damage. You may also want to wear a dust mask during this process to protect yourself from any harmful particles.

Post-Removal: Assessing and Prepping the Space

With your shower stall successfully removed, it's time to assess and prepare the area for your renovation. Here's what you should do:

Inspecting and Repairing the Underlying Surface

Examine the area where the shower stall was removed for any signs of damage, such as rot, water spots, or mold. If you find any issues, address them promptly to prevent further water damage or structural problems.

In some cases, you may need to replace damaged drywall or install new flooring before proceeding with your renovation. If you're unsure about the extent of the damage or how to address it, consider consulting a professional to ensure your bathroom's safety and structural integrity.

Preparing the Area for Your New Shower

Once you've addressed any damage and ensured the space is clean, it's time to prepare for your new shower. This may involve installing new flooring, updating plumbing, or laying out a new tile design.

Taking the time to plan and prepare your bathroom space will ensure a successful renovation and a beautiful, functional shower that meets your needs and complements your home's decor.

Removing a shower stall can be a challenging yet rewarding task. By following these steps and taking the time to plan and prepare, you'll be well on your way to transforming your bathroom into a space you truly love. So, let's get started, and happy renovating!

AD