how to remove a shimano freehub

How to Remove a Shimano Freehub

By David Allen
AD

Are you a cyclist looking to replace your worn-out rear wheel, or maybe you're just curious about the internal workings of your bicycle? Removing a Shimano freehub is a necessary step in either of these processes. While it might seem daunting at first, with the right tools and guides, it's a manageable task. We'll walk you through the process, ensuring you understand each step before moving on to the next.

Before we dive in, safety is key. Always work on your bicycle in a well-lit, stable area. Wear appropriate eye protection and, if necessary, gloves. It's also a good idea to have a clean, flat surface to work on. Now, let's gather our tools and get started.

What You'll Need

To remove a Shimano freehub, you'll need some specialized tools. Here's a list to ensure you have everything ready:

AD
the shimano repair kit is available for all types of motorbikes and bikes
the shimano repair kit is available for all types of motorbikes and bikes
How to replace a Shimano freehub - video | BikeRadar
How to replace a Shimano freehub - video | BikeRadar
How to replace a freehub body (freewheel), on a Shimano M785 hub, part 2
How to replace a freehub body (freewheel), on a Shimano M785 hub, part 2
  1. Lockring pliers - These are essential for removing the lockring that secures the freehub body.
  2. Cone wrenches - You'll need a set to loosen and remove the cones that keep the freehub body in place.
  3. Spoke wrench - This is useful for removing the cassette if necessary.
  4. Grease - You'll need this to relubricate the freehub body after cleaning.
  5. Rags or old towels - These are essential for cleaning the freehub body and hub.
  6. Penetrating oil - This can help loosen rusted or seized parts.
  7. Gloves - To protect your hands from grease, oil, and rust.

Understanding the Freehub

Before you start, it's crucial to understand what a freehub is and how it works. The freehub is the part of the rear wheel that engages with the cassette and allows the bike to coast smoothly. It consists of a series of pawls that click into place as the wheel turns, driving the bike forward. The freehub body, the part we'll be removing, is the inner tube that holds these pawls in place. It also engages with the lockring to keep everything secure.

There are several types of freehub bodies, depending on your specific bike and Shimano system. The process for removing them is generally the same, but there might be slight differences. Always consult your specific hub's service manual if you have any doubts.

Tricks To Remove & Service Shimano Deore Freehub Body. Clean, Grease, Assemble.
Tricks To Remove & Service Shimano Deore Freehub Body. Clean, Grease, Assemble.
How to service your Shimano hubs
How to service your Shimano hubs

Preparation: Disassembling the Wheel

Before you can remove the freehub body, you'll need to take apart the wheel. First, remove the cassette using your spoke wrench if it's not secured with set screws. Then, loosen and unscrew the cones on either side of the hub using your cone wrenches. This is what holds the freehub body in place.

Once the cones are loose, you should be able to pull the freehub body out. If it's resistant, don't force it. Instead, apply a little penetrating oil and let it soak, then try again. If it still won't budge, the pawls might be stuck. You can try tapping the wheel gently with a soft mallet to shake them loose.

AD

Removing the Freehub Body

Once you've removed the freehub body, you might notice that it's not fully free. That's because it's secured by a lockring. Use your lockring pliers to unscrew this ring. It might be tight, so again, be patient and consistent with your pressure. If it's rusted, you might need to spray some penetrating oil on it.

With the lockring removed, the freehub body should slide right out. If there's any resistance, don't force it. Instead, use a rubber mallet to tap it gently and encourage it out. It's essential not to damage the freehub body or its internal components.

Cleaning, Inspection, and Reassembly

Once you've removed the freehub body, it's essential to clean it thoroughly. This can help prevent any future issues and ensures everything works smoothly. Use rags or old towels dipped in a suitable cleaner to wipe it down. Be sure to get into all the nooks and crannies where dirt and grime can accumulate.

AD

After cleaning, inspect the freehub body for any signs of wear or damage. This might include gouges on the pawls, a sticky feel, or a rough surface. If you spot any issues, it might be time for a replacement. If everything looks good, gently lubricate the pawls and spring with grease, ensuring no excess remains.

Reinstalling the Freehub Body

Before reinstalling the freehub body, ensure your cones are clean and greased. The freehub body should slide in relatively easily. If there's resistance, double-check that the pawls are fully retracted and that you're twisting the freehub body as you push it into place.

Once the freehub body is fully seated, use your cone wrenches to reinstall and tighten the cones. It's essential to get this alignment just right. Firstly, it ensures that your bike shifts smoothly. Secondly, it helps prevent damage to your freewheel system. Always tighten by hand initially, checking and re-centering as you go. Once you've got the cone fully screwed in, use your cone wrenches to tighten.

AD

Reinstalling the Cassette and Final Checks

With the freehub body securely in place, you can reinstall your cassette. Screw on each cog by hand, aligning them properly with the freehub body. If it's a secured cassette, use your spoke wrench to tighten it fully. Finally, if necessary, reinstall your wheel into your bike.

Before you set off on your next ride, double-check that everything is fully secure and working correctly. Give your wheel a few gentle spins to ensure it's clicking smoothly. Tighten any loose cones or cassettes. Lastly, give your bike a thorough test ride to ensure everything feels as it should.

And there you have it - you've successfully removed and reinstalled a Shimano freehub. It might seem like a complex task, but with patience and careful attention to detail, it's a job anyone can do. With a clean, well-maintained freehub, you can ensure your bike rides as smoothly and efficiently as possible. So, get out there and enjoy the ride!

AD