Easy Schlage Door Handle Removal Trick
Have you found yourself in a situation where your Schlage door handle has seen better days, or perhaps you're giving your home a fresh new look and want to swap it out for a new one? Removing a Schlage door handle might seem like a daunting task, but it's actually a straightforward process that's well within your DIY capabilities. Let's guide you through the steps, ensuring you'll have that old handle off in no time.
Before we dive in, it's essential to note that the handle's age, how it was installed, and the door's specifics can slightly affect the process. However, for most conventional Schlage door handles, this guide should cover your needs. Always ensure you've got the right tools and follow each step carefully for a smooth and efficient process.
Assessing Your Schlage Door Handle
Before you start, it's crucial to understand the type of set-up you're dealing with. Schlage door handles typically come in two varieties: mortise-style and barrel-style. The primary difference lies in how they're mounted onto the door.
Mortise-style handles require a deep recess within the door edge, which is typical in older homes. Barrel-style handles, on the other hand, are more common in modern homes, and they sit flush against the door or have a shallow recess. Identifying your handle type helps ensure you're using the correct removal technique.
Gathering the Right Tools
To remove a Schlage door handle, you'll typically need an Allen wrench (around 7mm), a flathead screwdriver, some pliers, a hammer, and a nail set (optional, but helpful for keeping screw holes hidden).
For older mortise-style handles, you might also need a chisel and a mallet. Having the right tools ensures the process goes smoothly and prevents any unnecessary damage to your door and handle.
Mortise-Style Handle Removal
If you're dealing with a mortise-style Schlage door handle, begin by carefully removing the handle set from the door using an Allen wrench. Look for an Allen screw hole near the back of the handle, often concealed by a small cap that you'll need to pry off.
Insert the Allen wrench, turn counterclockwise to release the handle, and gently pull it off the door. If the handle is stubborn, you may need to use a flathead screwdriver and gentle persuasion to help it along. For the strike plate, use a chisel and mallet to carefully remove it. Ensure you save both the handle and the strike plate, as you'll use them as a template for installing the new handle.
Barrel-Style Handle Removal
Barrel-style Schlage door handles usually have a small hole or a screw on the inside of the handle. Use an Allen wrench or a flathead screwdriver to turn the set-back screw counterclockwise and release the handle. If the hole is clogged, try using a mixture of water and mild soap to clear it.
Once you've removed the screw, gently tap the handle using a hammer and a nail set (or a thin screwdriver if you don't have a nail set) to push it through the door. Then, carefully pull the handle off the door. To remove the strike plate, use a flathead screwdriver to pry it off, ensuring you don't damage the door.
Congratulations! You've now successfully removed your old Schlage door handle. Whether you're planning to install a new handle or simply need to repair your current one, taking this step is a crucial part of the process.
Before you put that hammer away, take a moment to consider the door preparation tips for your new handle installation. Ensuring your door is properly prepared will save you time and ensure a smooth process when you're ready to attach your new Schlage door handle.